Wegener Communications 4600 manual Test group value

Page 56

Operation

TEST group value

group: Mnemonic for a test group: Either RF, AV, DTMF, or REL.

value: Parametric value which has meaning depending on the test group selected.

Command to activate Installation Test Modes. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

If group is RF, the legal values are 1, 2, 3, 4, and OFF. Entering numbers for value cause the IRD to report the RF level (not locked to carrier) at that RF Feed Port every few seconds. Entering OFF stops the measurement.

If group is AV, the legal values are ON and OFF. If ON, a test pattern is activated on the video output and test tones activated on the audio output, the same as the generic TESTMODE command.

If group is DTMF, the legal values are ON and OFF. If ON, the command behaves like the DTMFVOL command entered with no parameters

If group is REL, the legal values are ON and OFF. If ON, both user cue relays are alternately energized and de-energized.

TESTOFF

Command stops all volatile test functions as if unit were reset. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

UNMUTE [source][source][source][...]

source: Same as the MUTE command.

Identical to MUTE except specified services are unmuted.

VER

Displays the boot-up Welcome banner and the versions of hardware and software components within the IRD. Should include the unit serial number, model number, and customer ID. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

VBI enable line field

enable: E for Enable or D for Disable.

line: Line # where VBI data is normally to be re-inserted. Values below 7 or above 22 are illegal.

field: Field # where VBI data is normally to be re-inserted. Values are 1 or 2 for upper and lower.

Command enables or disables VBI data re-insertion on the line and field indicated for those IRDs that support that function.

50

800032-01 Rev. G

www.wegener.com

Image 56
Contents Unity4600 Unity 4600 User’s Manual Table of Contents Alarms and Warnings Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G General Information Manual OverviewUnity 4600 Overview FunctionalDescription PhysicalSee See Transport In Options on Unity 4600 SpecificationsTechnical Specifications FRONT-PANEL Monitors Audio OutputSNR ALARM/CUEING Relays Serial PortsEthernet Port FRONT-PANEL EmailTransport In Options LNB DC Power Turbo PSK Receiver OPTION, Broadcom Protocol DVB-QPSK Turbo PSK Receiver with 4-PORT Switch Option RF Switch InputASI Transport Input Option DVB-ASI InputSafety Summary Glossary of Terms and Abbreviations COMPEL→DPI DtmfIRD CompelKMS LANRAM PMTPTS Tmra This page intentionally left blank 800032-01 Rev. G Unpacking and Inspection Location and MountingInstallation RackMounting DesktopOptions Unity 4600 ConnectionsTransport Rear panel Connectors Txdo + Txdo Rxdi +Rxdi ASI OUTSerial Port Configuration ConfigurationsDevice AssignmentsHandling Check Installation TestingRF input Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G Summary Automated recoveryTheory of Operation Operation Operation from Front Panel Unity 4600 Front-panel LayoutLCD Screen Relationships Alarm/Warning Screens Recovery AbortRF Switch Bypass Installation TestDefault Unit SetupHome ScreensLED Indicators Front-panel LED Indicator Descriptions Interpreting LEDsServices User Commands Command directory for Unity 4600 terminal commandsOperation from Local/Remote Terminal SyntaxAud1rt Same as aud1rt above Level Integer between 0 and 100 inclusive Command ends telnet sessions. Same as Quit command Time Time in seconds Lnbtst voltagerange tone Source Or O PC device baud parityCommand ends telnet sessions. Same as Exit command RD group RP group Rpath to username@addr Port RouteSetlnb Rffeed LOfreq Source Not used. In legacy IRDs, this was Fade timeout Test group value Maintenance General TroubleshootingNo audio, video, or ASI output No output or indicationsAlarms and Warnings Missing an audio, video, or ASI output while others are okayAlarm and Warning Descriptions LCD Alarm or Warning Meaning / Possible CauseASI transport output bears no program content because a Changes have been made on uplink transport mux No Program Allocation Table detected in input carrier or Ser pt N fail This page intentionally left blank 800032-01 Rev. G Technical Support Warranty624-0294, or e-mailservice@wegener.com Customer Service ? Other Screens? @ Application Current Menu Up? Press ESC Info Screens? Other Screens? @ Menu Up? Press ESC Home? Hold In ESC Misc Setups Press Enter Menu ScreensParameter Screens Change? Press Enter?Other Screens? @ Unit Label UnityThis page intentionally left blank 800032-01 Rev. G Index LAN LCD PIDUneven mechanical loading SDTThis page intentionally left blank
Related manuals
Manual 70 pages 45.58 Kb

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.