Wegener Communications 4600 manual RP group

Page 51

Unity 4600 User’s Manual

This non-volatile command sets the user (or expansion) relay addressed by number to the ON/OFF or "Follow-Warn" (if 'W) state specified.

Note: The W value for the state parameter is only accepted for the native relays (1 or 2).

If state is specified, but number is omitted, then the command is applied to ALL installed relays, with one exception. The exception is that the command to ALL relays will not be accepted by a native user cue relay already set in the logical "Follow-warn" state. (It MUST be individually addressed to return it to the ON or OFF non-volatile state. Entering this command without parameters shows the state of installed relays.

RP group

group: Indicates group of parameters to report, as follows:

AUD - Audio service diagnos.

AW - Alarm/Warning status

CA - Conditional Access diagnostics

DPI - Conditional Digital Program Insertion (DPI)

GL - Genlock system (if installed and applicable) LAN - IP/Ethernet diagnostics

NTW - COMPELnetwork control diagnostics PRGMP - Program mapping at ASI output MSC - Miscellaneous diagnostics

REC - Automated Recovery status

RF - Carrier Acquisition/Tracking diagnostics RPA - Return Path diagnostics

SW - Software download/self-test status

TS - Transport Stream diagnostics

VID - Video service diagnostics

Expanded report on unit NV operating parameters. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

RESET

Resets unit. A Local Control Command (available from the terminal regardless of "Local Control Enable/ Disable" commands from the network).

RPATH

Command to display all return path non-volatile settings. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network). A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

RPATH FROM domain

domain: Legal string of keyboard characters in proper domain-name format (e.g., string1.string2.string3…)

Domain name portion of “from” email address in Return Path reporting. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

RPATH RELAY addr

www.wegener.com

800032-01 Rev. G

45

Image 51
Contents Unity4600 Unity 4600 User’s Manual Table of Contents Alarms and Warnings Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G Manual Overview General InformationPhysical Unity 4600 OverviewFunctional DescriptionUnity 4600 Specifications Technical SpecificationsSee See Transport In Options on Audio Output SNRFRONT-PANEL Monitors FRONT-PANEL Email ALARM/CUEING RelaysSerial Ports Ethernet PortTransport In Options LNB DC Power Turbo PSK Receiver OPTION, Broadcom Protocol DVB-QPSK DVB-ASI Input Turbo PSK Receiver with 4-PORT Switch OptionRF Switch Input ASI Transport Input OptionSafety Summary Dtmf Glossary of Terms and AbbreviationsCOMPEL→ DPILAN IRDCompel KMSPMT PTSRAM Tmra This page intentionally left blank 800032-01 Rev. G Location and Mounting Unpacking and InspectionDesktop InstallationRack MountingUnity 4600 Connections TransportOptions Rear panel Connectors ASI OUT Txdo +Txdo Rxdi + RxdiAssignments Serial Port ConfigurationConfigurations DeviceHandling Installation Testing RF inputCheck Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G Automated recovery Theory of OperationSummary Operation Unity 4600 Front-panel Layout Operation from Front PanelLCD Screen Relationships Installation Test Alarm/Warning ScreensRecovery Abort RF Switch BypassScreens DefaultUnit Setup HomeInterpreting LEDs LED Indicators Front-panel LED Indicator DescriptionsServices Syntax User CommandsCommand directory for Unity 4600 terminal commands Operation from Local/Remote TerminalAud1rt Same as aud1rt above Level Integer between 0 and 100 inclusive Command ends telnet sessions. Same as Quit command Time Time in seconds Lnbtst voltagerange tone Source PC device baud parity Or OCommand ends telnet sessions. Same as Exit command RD group RP group Rpath to username@addr Route PortSetlnb Rffeed LOfreq Source Not used. In legacy IRDs, this was Fade timeout Test group value No output or indications MaintenanceGeneral Troubleshooting No audio, video, or ASI outputMissing an audio, video, or ASI output while others are okay Alarms and WarningsLCD Alarm or Warning Meaning / Possible Cause Alarm and Warning DescriptionsASI transport output bears no program content because a Changes have been made on uplink transport mux No Program Allocation Table detected in input carrier or Ser pt N fail This page intentionally left blank 800032-01 Rev. G Warranty 624-0294, or e-mailservice@wegener.comTechnical Support Customer Service Info Screens ? Other Screens? @ Menu Up? Press ESC Home? Hold In ESC? Other Screens? @ Application Current Menu Up? Press ESC Menu Screens Misc Setups Press EnterUnit Label Unity Parameter ScreensChange? Press Enter ?Other Screens? @This page intentionally left blank 800032-01 Rev. G Index PID LAN LCDSDT Uneven mechanical loadingThis page intentionally left blank
Related manuals
Manual 70 pages 45.58 Kb

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.