Wegener Communications 4600 manual RD group

Page 50

Operation

type: Indicates the type of report as follows:

C- Carrier Status

P- Parameters

G - Group Status

GL - Genlock system (if installed and applicable)

M - MPEG PSI Status

NC - Network Controller Status

R - Relay Status

RTLOG - non-volatile log of last 10 “tuning” type commands

S - Settings Status

ST - Settings Table

SP - Serial Port Configuration

See also parameters for RP and RD commands

[page]: This option can have a value of 1 to 40 and is only applicable for the group status report. Indicates the page to be reported. If omitted, all eight pages are reported and scrolls off the terminal screen.

With the R command, the user gets a combined report of unit non-volatile settings and status and diagnostics for each item grouping (e.g., RF for all unit settings and all status diagnostics for carrier

acq/tracking). A Local Control Command (available from the terminal regardless of "Local Control

Enable/Disable" commands from the network).

RD group

group: Indicates group of status/diagnostic information to report, as follows:

AUD - Audio service diagnos.

AW - Alarm/Warning status

CA - Conditional Access diagnostics

DPI - Conditional Digital Program Insertion (DPI)

GL - Genlock system (if installed and applicable) LAN - IP/Ethernet diagnostics

NTW - COMPELnetwork control diagnostics PRGMP - Program mapping at ASI output MSC - Miscellaneous diagnostics

REC - Automated Recovery status

RF - Carrier Acquisition/Tracking diagnostics RPA - Return Path diagnostics

SW - Software download/self-test status

TS - Transport Stream diagnostics

VID - Video service diagnostics

Expanded report on unit volatile diagnostic and status information. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

RE state [number]

state: ON, OFF, or W

number: 1 or 2, or E1 thru En (for n-relay expansion option module, if installed) indicating the affected user relay.

44

800032-01 Rev. G

www.wegener.com

Image 50
Contents Unity4600 Unity 4600 User’s Manual Table of Contents Alarms and Warnings Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G General Information Manual OverviewDescription Unity 4600 OverviewFunctional PhysicalSee See Transport In Options on Unity 4600 SpecificationsTechnical Specifications FRONT-PANEL Monitors Audio OutputSNR Ethernet Port ALARM/CUEING RelaysSerial Ports FRONT-PANEL EmailTransport In Options LNB DC Power Turbo PSK Receiver OPTION, Broadcom Protocol DVB-QPSK ASI Transport Input Option Turbo PSK Receiver with 4-PORT Switch OptionRF Switch Input DVB-ASI InputSafety Summary DPI Glossary of Terms and AbbreviationsCOMPEL→ DtmfKMS IRDCompel LANRAM PMTPTS Tmra This page intentionally left blank 800032-01 Rev. G Unpacking and Inspection Location and MountingMounting InstallationRack DesktopOptions Unity 4600 ConnectionsTransport Rear panel Connectors Rxdi Txdo +Txdo Rxdi + ASI OUTDevice Serial Port ConfigurationConfigurations AssignmentsHandling Check Installation TestingRF input Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G Summary Automated recoveryTheory of Operation Operation Operation from Front Panel Unity 4600 Front-panel LayoutLCD Screen Relationships RF Switch Bypass Alarm/Warning ScreensRecovery Abort Installation TestHome DefaultUnit Setup ScreensLED Indicators Front-panel LED Indicator Descriptions Interpreting LEDsServices Operation from Local/Remote Terminal User CommandsCommand directory for Unity 4600 terminal commands SyntaxAud1rt Same as aud1rt above Level Integer between 0 and 100 inclusive Command ends telnet sessions. Same as Quit command Time Time in seconds Lnbtst voltagerange tone Source Or O PC device baud parityCommand ends telnet sessions. Same as Exit command RD group RP group Rpath to username@addr Port RouteSetlnb Rffeed LOfreq Source Not used. In legacy IRDs, this was Fade timeout Test group value No audio, video, or ASI output MaintenanceGeneral Troubleshooting No output or indicationsAlarms and Warnings Missing an audio, video, or ASI output while others are okayAlarm and Warning Descriptions LCD Alarm or Warning Meaning / Possible CauseASI transport output bears no program content because a Changes have been made on uplink transport mux No Program Allocation Table detected in input carrier or Ser pt N fail This page intentionally left blank 800032-01 Rev. G Technical Support Warranty624-0294, or e-mailservice@wegener.com Customer Service ? Other Screens? @ Application Current Menu Up? Press ESC Info Screens? Other Screens? @ Menu Up? Press ESC Home? Hold In ESC Misc Setups Press Enter Menu Screens?Other Screens? @ Parameter ScreensChange? Press Enter Unit Label UnityThis page intentionally left blank 800032-01 Rev. G Index LAN LCD PIDUneven mechanical loading SDTThis page intentionally left blank
Related manuals
Manual 70 pages 45.58 Kb

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.