Wegener Communications 4600 manual Or O, PC device baud parity

Page 48

Operation

PARTPID pid

pid: Hex value between 20 and 1FFE to set a value, and 0 to disable.

Command sets the borderline (or “partition”) PID at, and above which, the IRD may expect compatible scrambling against which it may apply the proper descrambler. PIDs below this point may be scrambled with an alien, 3rd party system. See individual IRD specs for more detail on unit behavior. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

PC device baud parity

device: One of MODEM, TERMINAL, AUXDATA, CA, or COMPEL.

baud: 1200, 2400, 4800, 9600, 19200, or 38400.

parity:

N, E, or O.

Configures communication parameters for any serial device. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

PERM [format] [pol/feed#] [carrier freq] [data rate] [FEC] [Tag Site] [program#] [label]

format: If an RF input, one of the legal modulation formats: QPSK for DVB-QPSK;8PSK for DVB- 8PSK;TQPSK for Turbo-QPSK);T8PSK for Turbo-8PSK;T16QAM for Turbo-16-QAM; or 16QAM for DVB 16QAM. May be omitted if DVB-QPSK.

For an ASI Transport input, specify ASI. If this parameter is set to OK, then the current setting, if a Transient setting, becomes the new Permanent setting.

pol/feed#: If an RF input, one of four possible RF feeds, 1, 2, 3 or 4. If an ASI input, one of two possible ASI feeds, 1 or 2.

If no RF option, this field may be used for ASTRA polarization, H or V. This field may be omitted if no RF switch option is installed.

carrier freq:If an RF input, the downlink carrier frequency in MHz (precision to two decimal places OK). Field is omitted for an ASI input only.

data rate: If an RF input, the Transport data rate in Mbps (precision to two decimal places OK). Field is omitted for an ASI input only.

FEC: If an RF input, the inner FEC ratio. Field is omitted for an ASI input only.

The legal options are: for QPSK- 1/2, 2/3, 3/4, 5/6, and 7/8;

for 8PSK- 2/3, 5/6, 8/9; and for 16 QAM- 3/4, and 7/8.

Other legal values may be defined for new modulation formats.

tag site: If an RF input, the tag site for Carrier ID tag. Field is omitted for an ASI input only.

program#: Program number, ‘*’ for wildcard, or null (for no program assigned).

label: Channel Label (optional, may be omitted).

Command to establish new Permanent Unit Setting with the parameter values given. If the format is set to OK, no other parameters are accepted or required.

PERMCH value

42

800032-01 Rev. G

www.wegener.com

Image 48
Contents Unity4600 Unity 4600 User’s Manual Table of Contents Alarms and Warnings Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G General Information Manual OverviewUnity 4600 Overview FunctionalDescription PhysicalUnity 4600 Specifications Technical SpecificationsSee See Transport In Options on Audio Output SNRFRONT-PANEL Monitors ALARM/CUEING Relays Serial PortsEthernet Port FRONT-PANEL EmailTransport In Options LNB DC Power Turbo PSK Receiver OPTION, Broadcom Protocol DVB-QPSK Turbo PSK Receiver with 4-PORT Switch Option RF Switch InputASI Transport Input Option DVB-ASI InputSafety Summary Glossary of Terms and Abbreviations COMPEL→DPI DtmfIRD CompelKMS LANPMT PTSRAM Tmra This page intentionally left blank 800032-01 Rev. G Unpacking and Inspection Location and MountingInstallation RackMounting DesktopUnity 4600 Connections TransportOptions Rear panel Connectors Txdo + Txdo Rxdi +Rxdi ASI OUTSerial Port Configuration ConfigurationsDevice AssignmentsHandling Installation Testing RF inputCheck Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G Automated recovery Theory of OperationSummary Operation Operation from Front Panel Unity 4600 Front-panel LayoutLCD Screen Relationships Alarm/Warning Screens Recovery AbortRF Switch Bypass Installation TestDefault Unit SetupHome ScreensLED Indicators Front-panel LED Indicator Descriptions Interpreting LEDsServices User Commands Command directory for Unity 4600 terminal commandsOperation from Local/Remote Terminal SyntaxAud1rt Same as aud1rt above Level Integer between 0 and 100 inclusive Command ends telnet sessions. Same as Quit command Time Time in seconds Lnbtst voltagerange tone Source Or O PC device baud parityCommand ends telnet sessions. Same as Exit command RD group RP group Rpath to username@addr Port RouteSetlnb Rffeed LOfreq Source Not used. In legacy IRDs, this was Fade timeout Test group value Maintenance General TroubleshootingNo audio, video, or ASI output No output or indicationsAlarms and Warnings Missing an audio, video, or ASI output while others are okayAlarm and Warning Descriptions LCD Alarm or Warning Meaning / Possible CauseASI transport output bears no program content because a Changes have been made on uplink transport mux No Program Allocation Table detected in input carrier or Ser pt N fail This page intentionally left blank 800032-01 Rev. G Warranty 624-0294, or e-mailservice@wegener.comTechnical Support Customer Service Info Screens ? Other Screens? @ Menu Up? Press ESC Home? Hold In ESC? Other Screens? @ Application Current Menu Up? Press ESC Misc Setups Press Enter Menu ScreensParameter Screens Change? Press Enter?Other Screens? @ Unit Label UnityThis page intentionally left blank 800032-01 Rev. G Index LAN LCD PIDUneven mechanical loading SDTThis page intentionally left blank
Related manuals
Manual 70 pages 45.58 Kb

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.