Wegener Communications 4600 manual Aud1rt Same as aud1rt above

Page 42

Operation

COMPEL-req:Values are REQ, NR, or GL.

Forces COMPEL→ to be temporarily required, not required, or left as normal global unit setting (respectively) when attempting this Preset during Recovery.

tags-req:Values are REQ, NR, or GL.

Forces Carrier ID Tags to be temporarily required, not required, or left as normal global unit setting (respectively) when attempting this Preset during Recovery.

aud1: Language descriptor (or wildcard ‘*’) for audio stream to be assigned to Audio port 1.

aud1_rt: S - Stereo (left and right components routed as connected at original MPEG encoder)

1- Original left component to both L and R outputs

2- Original right component to both L and R outputs

M - Sum of left and right components to both L and R outputs

R - Reverse of "Stereo" above (if allowed by hardware)

aud2: Language descriptor (or wildcard ‘*’) for audio stream to be assigned to Audio port 2.

aud1_rt: Same as aud1_rt above

margin: Margin offset in dB. Ranges between 0 and N dB. (See MARGIN command for N.)

This command augments the ADDS command to populate the extended Preset Entry. Note that if this Preset is used to acquire services (through Recovery or user command), these temporary COMPEL and Tags-required parameters, if used, will be adopted as the permanent global unit parameters.

ADDS location [format] [feed #] [carrier freq] [data rate] [FEC] [Tag Site] program# [label]

location: Value from 1 up to max (highest entry #) indicating location in settings table.

For format, feed #, carrier freq, data rate, FEC, tag site, program #, and label see PERM command.

This command adds entries to the U5000-style preset table at the entry number given. If entry at location was already in use, it will be overwritten.

APPSTAT

Forces IRD to report the status of the two application storage spaces, showing current and backup application software (if any). A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

APPSWITCH

Unloads the currently executing application software and, instead, loads and runs the backup software.

AUDATTEN port# atten

port#: Either 1 or 2 for audio ports 1 or 2.

atten: Must be a numeric value for attenuation in dB. Legal values are given in individual IRD specifications.

36

800032-01 Rev. G

www.wegener.com

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Unity4600 Unity 4600 User’s Manual Table of Contents Alarms and Warnings Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G General Information Manual OverviewDescription Unity 4600 OverviewFunctional PhysicalUnity 4600 Specifications Technical SpecificationsSee See Transport In Options on Audio Output SNRFRONT-PANEL Monitors Ethernet Port ALARM/CUEING RelaysSerial Ports FRONT-PANEL EmailTransport In Options LNB DC Power Turbo PSK Receiver OPTION, Broadcom Protocol DVB-QPSK ASI Transport Input Option Turbo PSK Receiver with 4-PORT Switch OptionRF Switch Input DVB-ASI InputSafety Summary DPI Glossary of Terms and AbbreviationsCOMPEL→ DtmfKMS IRDCompel LANPMT PTSRAM Tmra This page intentionally left blank 800032-01 Rev. G Unpacking and Inspection Location and MountingMounting InstallationRack DesktopUnity 4600 Connections TransportOptions Rear panel Connectors Rxdi Txdo +Txdo Rxdi + ASI OUTDevice Serial Port ConfigurationConfigurations AssignmentsHandling Installation Testing RF inputCheck Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G Automated recovery Theory of OperationSummary Operation Operation from Front Panel Unity 4600 Front-panel LayoutLCD Screen Relationships RF Switch Bypass Alarm/Warning ScreensRecovery Abort Installation TestHome DefaultUnit Setup ScreensLED Indicators Front-panel LED Indicator Descriptions Interpreting LEDsServices Operation from Local/Remote Terminal User CommandsCommand directory for Unity 4600 terminal commands SyntaxAud1rt Same as aud1rt above Level Integer between 0 and 100 inclusive Command ends telnet sessions. Same as Quit command Time Time in seconds Lnbtst voltagerange tone Source Or O PC device baud parityCommand ends telnet sessions. Same as Exit command RD group RP group Rpath to username@addr Port RouteSetlnb Rffeed LOfreq Source Not used. In legacy IRDs, this was Fade timeout Test group value No audio, video, or ASI output MaintenanceGeneral Troubleshooting No output or indicationsAlarms and Warnings Missing an audio, video, or ASI output while others are okayAlarm and Warning Descriptions LCD Alarm or Warning Meaning / Possible CauseASI transport output bears no program content because a Changes have been made on uplink transport mux No Program Allocation Table detected in input carrier or Ser pt N fail This page intentionally left blank 800032-01 Rev. G Warranty 624-0294, or e-mailservice@wegener.comTechnical Support Customer Service Info Screens ? Other Screens? @ Menu Up? Press ESC Home? Hold In ESC? Other Screens? @ Application Current Menu Up? Press ESC Misc Setups Press Enter Menu Screens?Other Screens? @ Parameter ScreensChange? Press Enter Unit Label UnityThis page intentionally left blank 800032-01 Rev. G Index LAN LCD PIDUneven mechanical loading SDTThis page intentionally left blank
Related manuals
Manual 70 pages 45.58 Kb

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.
Top Page Image Contents