Wegener Communications 4600 manual Source Not used. In legacy IRDs, this was Fade timeout

Page 55

Unity 4600 User’s Manual

source:

1 - Not used. (In legacy IRDs, this was Fade timeout.)

2- Services Recovery Timeout. (In legacy IRDs, this was Installation timeout.)

3- Network Recovery Timeout. (In legacy IRDs, this was No COMPELtimeout.

4- Recovery Iteration Time. (In legacy IRDs, this was Header Seek timeout.)

5- Local Control Re-enable Timeout. (In legacy IRDs this was Local (Control) Recovery timeout.)

time: Time-out value in seconds or HHHH:MM:SS format. Minimum value is 1, and maximum value 35999999 (9999:59:59 hms) for all others.

Command sets Automated Recovery timeout specified by source to the value specified by time.

SETUID [id]

id: Unit ID number between 00 and 99 inclusive.

Command for assigning the unit ID number for gaining "talker" access on a shared serial bus. The factory default setting for id is '00', which also disables terminal daisy-chain capability. If the parameter is omitted, then this command returns the current unit ID setting. Command is only applicable to products that feature serial "daisy-chain".

SP program

program: Either an integer between 1 and 65,535 (representing a number) or an alphanumeric string (representing a name), preference being on a number to resolve ambiguity.

Command changes selected program by Program Number (from PAT) or SDT descriptor. This command works similarly to a PERM command.

TEMP [format] [feed #] [carrier freq] [data rate] [FEC] [Tag Site] program# time

For format, feed #, carrier freq, data rate, FEC, tag site, and program #, see PERM command.

time: Length of insert in either HH:MM:SS format (valid range is 0:00:00 to 18:00:00, leading zeros OK to omit on hours) OR in number of seconds. (A one-hourTEMP could have a parameters: of 1:00:00 or 3600.)

Command which performs a volatile temporary insert for an amount of time given by time. Unit sets its temporary Unit Settings to the values given.

Note: No label may be applied using this terminal command.

TEMPCH value time

value: Either the value of a Preset table entry number OR the Channel Label of an entry, priority given to Label if any ambiguity. If an entry number, legal values range from 1 up to N (where N is number of Preset support this product).

time: Same as for TEMP.

Volatile command which sets volatile temporary Unit Settings to those retrieved from the Preset table according to value for time given by time. Similar to TEMP command.

TEMPSENS

Command displays internal unit temperature if available.

www.wegener.com

800032-01 Rev. G

49

Image 55
Contents Unity4600 Unity 4600 User’s Manual Table of Contents Alarms and Warnings Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G Manual Overview General InformationPhysical Unity 4600 OverviewFunctional DescriptionTechnical Specifications Unity 4600 SpecificationsSee See Transport In Options on SNR Audio OutputFRONT-PANEL Monitors FRONT-PANEL Email ALARM/CUEING RelaysSerial Ports Ethernet PortTransport In Options LNB DC Power Turbo PSK Receiver OPTION, Broadcom Protocol DVB-QPSK DVB-ASI Input Turbo PSK Receiver with 4-PORT Switch OptionRF Switch Input ASI Transport Input OptionSafety Summary Dtmf Glossary of Terms and AbbreviationsCOMPEL→ DPILAN IRDCompel KMSPTS PMTRAM Tmra This page intentionally left blank 800032-01 Rev. G Location and Mounting Unpacking and InspectionDesktop InstallationRack MountingTransport Unity 4600 ConnectionsOptions Rear panel Connectors ASI OUT Txdo +Txdo Rxdi + RxdiAssignments Serial Port ConfigurationConfigurations DeviceHandling RF input Installation TestingCheck Unity 4600 User’s Manual This page intentionally left blank 800032-01 Rev. G Theory of Operation Automated recoverySummary Operation Unity 4600 Front-panel Layout Operation from Front PanelLCD Screen Relationships Installation Test Alarm/Warning ScreensRecovery Abort RF Switch BypassScreens DefaultUnit Setup HomeInterpreting LEDs LED Indicators Front-panel LED Indicator DescriptionsServices Syntax User CommandsCommand directory for Unity 4600 terminal commands Operation from Local/Remote TerminalAud1rt Same as aud1rt above Level Integer between 0 and 100 inclusive Command ends telnet sessions. Same as Quit command Time Time in seconds Lnbtst voltagerange tone Source PC device baud parity Or OCommand ends telnet sessions. Same as Exit command RD group RP group Rpath to username@addr Route PortSetlnb Rffeed LOfreq Source Not used. In legacy IRDs, this was Fade timeout Test group value No output or indications MaintenanceGeneral Troubleshooting No audio, video, or ASI outputMissing an audio, video, or ASI output while others are okay Alarms and WarningsLCD Alarm or Warning Meaning / Possible Cause Alarm and Warning DescriptionsASI transport output bears no program content because a Changes have been made on uplink transport mux No Program Allocation Table detected in input carrier or Ser pt N fail This page intentionally left blank 800032-01 Rev. G 624-0294, or e-mailservice@wegener.com WarrantyTechnical Support Customer Service ? Other Screens? @ Menu Up? Press ESC Home? Hold In ESC Info Screens? Other Screens? @ Application Current Menu Up? Press ESC Menu Screens Misc Setups Press EnterUnit Label Unity Parameter ScreensChange? Press Enter ?Other Screens? @This page intentionally left blank 800032-01 Rev. G Index PID LAN LCDSDT Uneven mechanical loadingThis page intentionally left blank
Related manuals
Manual 70 pages 45.58 Kb

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.