Wegener Communications 4600 manual Serial Port Configuration

Page 26

UNITY 4600 USER’S MANUAL

Table 4 below lists the U4600 front-panel connectors, their types and pinout information.

Table 2.5: Front-Panel Connectors

Connector

Type

Pin

Signal Name

Designation

 

 

 

 

 

 

 

Video Monitor

BNC jack

 

Composite Video monitor

 

 

 

 

Audio Monitor

¼” stereo phone jack

 

Stereo audio headphone monitor, selectable

 

 

 

between audio ports 1 or 2

 

 

 

 

2.4Serial Port Configuration

Device

The U4600 has one external serial port. A “device” must be assigned once to the serial

assignments

port, but no “device” may be assigned more than once. In addition, more than one device

 

may be assigned at one time but only one device which accepts input may be assigned. (If

 

multiple devices are assigned to the serial port, the port’s settings are controlled by the

 

device with higher priority according to the list below.) Device port assignment and device

 

configuration (see below) may be controlled only from the unit front panel and the network

 

may disable this capability. The possible devices are:

 

1.

Terminal

 

2. Modem (“modem” being remote terminal via modem)

 

3.

Local COMPEL®

 

4.

Auxiliary Data

 

5. Printer (including COMPEL® e-mail and reports)

Device

When

a serial

port configuration command is received, the specified configuration is

configurations

immediately stored for the specified device (e.g. for the “Terminal” device). If a serial port

 

is currently assigned another device, then its output buffer is immediately flushed and the

 

port re-configured. Communication is fixed at 1 start, 1 stop, and 8 data bits, with no hard-

 

ware handshaking. No provision for software handshaking is made in this Release. The

 

serial port’s behavior for each of its device types is described in the following table.

 

:

 

 

Table 2.6: Device Configurations

 

 

 

 

 

 

 

 

 

Device

 

Serial Port Behavior (Italics are Programmable, Bold are Fixed)

 

 

 

 

 

Terminal

 

Configured to 19.2k, N, 8, 1. The unit responds to the terminal commands as

 

 

 

 

described in 3.4 Operation from Local/Remote Terminal on page 59.

 

 

 

 

 

Modem

 

Configured to B, P, 8, 1. The unit responds to the commands as described in 3.4

 

 

 

 

Operation from Local/Remote Terminal on page 59.

 

 

 

 

 

Aux Data

 

Configured to B, P, 8, 1. This is an output only (all inputs ignored).

 

 

 

 

 

 

Local

 

 

Configured to B, P, 8, 1. This is an input for testing only.

 

COMPEL

 

 

 

 

 

 

 

Printer

 

Configured to B, P, 8, 1. This is an output only.

 

 

 

 

The legal values for B are: 1200, 2400, 4800, 9600, 19.2k, or 38.4 kilobaud.

 

The legal values for P are: ‘O’, ‘E’, or ‘N’ for Odd, Even, or No parity.

 

 

 

 

 

800032-01 Rev. F

18

www.wegener.com

Page 25 Page 27
Image 26
Page 25 Page 27
Contents UNITY4600 800032-01 Rev. F Iii This page intentionally blank Table of Contents List of Figures List of Tables 800032-01 Rev. F Viii Manual Overview Unity 4600 User’s ManualProduct Overview Unity 4600 Professional Media RecorderCharacteristic Specification Unity 4600 Product SpecificationsTechnical Specifications Front Panel Monitors Audio OutputDtmf Output Serial PortsFront Panel E-Mails Alarm/Cuing RelaysEthernet Ports ChassisCharacteristic Transport-In OptionsTurbo PSK Receiver Option, Broadcom Protocols DVB-QPSK Receiver with 4-Port RF Switch OptionSwitched RF Inputs Turbo Receiver with 4-Port Switch Option RF Switch Input DVB-QPSKGlossary of Terms Safety SummaryGlossary of Terms and Abbreviations Term DefinitionBoot loader RecoveryOr Recovery AutomatedMode Presets TableNetwork Protection PES StreamSetting, Last Service DescriptorService Settings CommandedLocation and Mounting Your warrantyUnpacking and Inspection Mandated Suppression Radio Frequency EmissionsDesktop Installation Mechanical LoadingU4600 Connections See .2 for Transport Options for this slotComposite Video Out Rear Panel ConnectorsConnector Type Pin Signal Name Designation Alarm Cuing Serial ControlTurbo-PSK with 4-way RF Switch Transport In Option Connector Type Pin Signal Name Designation EthernetDVB-QPSK with 4-way RF Switch Transport In Option 115/230 VACSerial Port Configuration Aux Data Device Handling Terminal I/OModem I/O Printer OuputInstallation Testing VOLnnnnnnnnnnnnn Relay Pulse CheckThis page intentionally left blank Functional Summary Automated Recovery Theory of OperationUnity 4600 Functional Block Diagram Monitoring and ControlOperation from Front Panel LCD Screen RelationshipsLCD Screen Content LCD Screen RelationshipSummary of Top-Level LCD Screens and Their Functions Download Screen as Default Home Default ScreensScreen Name Functions/Applications Unit Setup Audio FP Monitor Selection Screen as DefaultInterpreting Front Panel LEDs Front-Panel LED Indicator DescriptionsIndicator Label Color and State Meaning Rear-Panel Front Panel Audio MonitorOverview and Syntax CommandsOperation from Local/Remote Terminal UserAud1rt Same as aud1rt above Audmon port# Dels entryGhostlist action PID Dtmfvol percentForcerf port LAN Gateway addr LAN IP addrLAN Subnet addr LAN Mode mode Mode DHCP, WEG, or StaticLatchalarms Lnbpwr outputASI Loadnv sourceOr O Partpid pidPassword One to six alphanumeric characters Permch valueState ON, OFF, or WRpath from domain Rpath Relay addrRpath to username@addr SET from source PortRoute Setlabel labelSetpedest Settimeout source timeSource Setpin valueCommand displays internal unit temperature if available Unmute sourcesourcesource Alarm LED On and Carrier LED Off MaintenanceGeneral Troubleshooting Alarm and Warning LEDs Off Alarm and Carrier LEDs Both OnAlarm or Warning LED On Alarms and Warnings Alarm and Warning DescriptionsProblem Content for ASI N/AContent Routing High Error RateIP Address Conflict Invalid VBI Data FmtInvalid Video Format KMS Stream LostNo Genlock Sync No RF SignalNo Dhcp Server Found No ID Tag FoundTest Mode in Use RF Signal OverloadSetting Out of Range PMT DisappearedVideo Not Found Video Buff OverflowVideo CMD Muted Video PES Data LostWarranty Technical SupportThis page intentionally left blank Info Screens Menu ScreensMisc Setups Parameter ScreensIndex LED Questions Rack This page intentionally left blank
Related manuals
Manual 75 pages 30.76 Kb

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.
Top Page Image Contents