Wegener Communications 4600 Source, Setpedest, Setpin value, Settimeout source time, Setuid id

Page 52

UNITY 4600 USERS MANUAL

Table 3.3: Command Directory for U4600 Terminal Commands

SETLNB {Rf_feed} LO_freq

Rf_feed: If the RF Switch expansion option is installed, this is one input to that switch (1 through 4). If no RF Switch option is installed, then it is an error to enter data here!

LO_freq: Either a number or mnemonic. If a number, this value represents the LNB LO frequency in MHz. It can have up to two decimal places and its valid range is from 0 to 14000.00. The legal mnemonics are C (for Standard C-band, 5150 MHz default), KU (for US Ku- band, 10750 MHz default), EHKU (for European Hi Ku-band, 10600 MHz default), or ELKU (for European Low Ku-band, 9750 MHz default).

(1)If the current LNB mode selected is Universal: This command is legal only when entered without parameters. In this case, the IRD returns the current calculated setting command sent to the LNB (either “9.75 GHz” or “10.60 GHz”).

(2)If the current LNB mode selected is LO: This command sets the assumed LNB LO frequency to the value entered in MHz OR the MHz value represented by the mnemonic. If there is an optional RF switch installed, then the rf_feed field data must be entered. Entering the command without parameters returns the current setting.

A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

SETPEDEST xxx

xxx:E for enable or D for disable.

Enables or disables the “pedestal” setup, the addition of +7.5 IRE to the luminance level of active NTSC video, if NTSC is in use. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

SETPIN value

value:Decimal representation of PIN key, between 0 and 16777215.

Command sets the PIN scrambling key number.

SETTIMEOUT source time

source:

1 - Not used. (In legacy IRDs, this was Fade timeout.)

 

2

- Services Recovery Timeout. (In legacy IRDs, this was Installation timeout.)

 

3

- Network Recovery Timeout. (In legacy IRDs, this was No COMPEL® timeout.

 

4

- Recovery Iteration Time. (In legacy IRDs, this was Header Seek timeout.)

 

5

- Local Control Re-enable Timeout. (In legacy IRDs this was Local (Control) Recovery

 

 

timeout.)

 

 

time:

Time-out value in seconds or HHHH:MM:SS format. Minimum value is 1, and maximum

 

value 35999999 (9999:59:59 hms) for all others.

Command sets Automated Recovery timeout specified by source to the value specified by time.

SETUID [id]

id:Unit ID number between 00 and 99 inclusive.

Command for assigning the unit ID number for gaining "talker" access on a shared serial bus. The factory default setting for id is '00', which also disables terminal daisy-chain capability. If the parameter is omitted, then this command returns the current unit ID setting. Command is only applicable to products that feature serial "daisy-chain".

800032-01 Rev. F

44

www.wegner.com

Image 52
Contents UNITY4600 800032-01 Rev. F Iii This page intentionally blank Table of Contents List of Figures List of Tables 800032-01 Rev. F Viii Manual Overview Unity 4600 User’s ManualProduct Overview Unity 4600 Professional Media RecorderTechnical Specifications Unity 4600 Product SpecificationsCharacteristic Specification Audio Output Dtmf OutputFront Panel Monitors Serial PortsAlarm/Cuing Relays Ethernet PortsFront Panel E-Mails ChassisCharacteristic Transport-In OptionsSwitched RF Inputs DVB-QPSK Receiver with 4-Port RF Switch OptionTurbo PSK Receiver Option, Broadcom Protocols Turbo Receiver with 4-Port Switch Option RF Switch Input DVB-QPSKSafety Summary Glossary of Terms and AbbreviationsGlossary of Terms Term DefinitionRecovery Or RecoveryBoot loader AutomatedPresets Table Network ProtectionMode PES StreamService Descriptor Service SettingsSetting, Last CommandedYour warranty Unpacking and InspectionLocation and Mounting Mandated Suppression Radio Frequency EmissionsDesktop Installation Mechanical LoadingU4600 Connections See .2 for Transport Options for this slotRear Panel Connectors Connector Type Pin Signal Name Designation Alarm CuingComposite Video Out Serial ControlConnector Type Pin Signal Name Designation Ethernet DVB-QPSK with 4-way RF Switch Transport In OptionTurbo-PSK with 4-way RF Switch Transport In Option 115/230 VACSerial Port Configuration Device Handling Terminal I/O Modem I/OAux Data Printer OuputInstallation Testing VOLnnnnnnnnnnnnn Relay Pulse CheckThis page intentionally left blank Functional Summary Automated Recovery Theory of OperationUnity 4600 Functional Block Diagram Monitoring and ControlOperation from Front Panel LCD Screen RelationshipsLCD Screen Content LCD Screen RelationshipSummary of Top-Level LCD Screens and Their Functions Home Default Screens Screen Name Functions/Applications Unit SetupDownload Screen as Default Audio FP Monitor Selection Screen as DefaultIndicator Label Color and State Meaning Front-Panel LED Indicator DescriptionsInterpreting Front Panel LEDs Rear-Panel Front Panel Audio MonitorCommands Operation from Local/Remote TerminalOverview and Syntax UserAud1rt Same as aud1rt above Audmon port# Dels entryForcerf port Dtmfvol percentGhostlist action PID LAN Gateway addr LAN IP addrLAN Mode mode Mode DHCP, WEG, or Static LatchalarmsLAN Subnet addr Lnbpwr outputASI Loadnv sourceOr O Partpid pidPassword One to six alphanumeric characters Permch valueState ON, OFF, or WRpath from domain Rpath Relay addrRpath to username@addr Port RouteSET from source Setlabel labelSettimeout source time SourceSetpedest Setpin valueCommand displays internal unit temperature if available Unmute sourcesourcesource General Troubleshooting MaintenanceAlarm LED On and Carrier LED Off Alarm or Warning LED On Alarm and Carrier LEDs Both OnAlarm and Warning LEDs Off Alarms and Warnings Alarm and Warning DescriptionsContent for ASI N/A Content RoutingProblem High Error RateInvalid VBI Data Fmt Invalid Video FormatIP Address Conflict KMS Stream LostNo RF Signal No Dhcp Server FoundNo Genlock Sync No ID Tag FoundRF Signal Overload Setting Out of RangeTest Mode in Use PMT DisappearedVideo Buff Overflow Video CMD MutedVideo Not Found Video PES Data LostWarranty Technical SupportThis page intentionally left blank Info Screens Menu ScreensMisc Setups Parameter ScreensIndex LED Questions Rack This page intentionally left blank
Related manuals
Manual 75 pages 30.76 Kb

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.