Wegener Communications 4600 manual Rear-Panel, Front Panel Audio Monitor

Page 38

UNITY 4600 USERS MANUAL

Table 3.2: Front-Panel LED Indicator Descriptions

Indicator Label

 

Color and State*

Meaning

 

 

 

 

CUE

 

GREEN constant

A user cue relay is closed (energized).

 

 

 

 

 

 

GREEN flutter

During a user relay “pulse” activation on any relay.

 

 

 

 

 

 

Off

All user cue relays are open (de-energized).

 

 

 

 

ALARM

 

RED constant

One or more current alarm indications.

 

 

 

 

 

 

RED blink

An alarm event has occurred in the past and has not been

 

 

 

 

acknowledged and cleared by the user. Note that this state may

 

 

 

 

exist together with a current alarm (RED constant). In that case, the

 

 

 

 

blink state is defined as quickly cycling OFF-ON-OFF (~100ms

 

 

 

 

each) approximately every 2 seconds.

 

 

 

 

 

 

Off

No alarm condition currently exists.

 

 

 

 

AUTH

 

GREEN constant

Unit has transport MPEG sync and the stream is not scrambled (in

 

 

 

 

the clear). Streams that are “clear” are always presumed to be

 

 

 

 

“authorized”.

 

 

 

 

OR:

 

 

 

 

Unit is authorized for current scrambled transport stream (or

 

 

 

 

selected program) and has transport MPEG sync. When using

 

 

 

 

Wegener CA (’97 Version), being “authorized” means being

 

 

 

 

addressed with current and valid ciphered keystream messages. In

 

 

 

 

a PIN system, if the transport stream is scrambled, and the unit has

 

 

 

 

been programmed with any key other than the null ‘00000’, then it

 

 

 

 

presumes that it is “authorized”.

 

 

 

 

 

 

GREEN flutter

Unit has successfully deciphered a valid descrambling seed in the

 

 

 

 

last five seconds. Normal behavior in functioning CA system.

 

 

 

 

 

 

Off

Unit has transport sync, the transport stream is scrambled, and the

 

 

 

 

unit is NOT authorized. Also OFF if no transport sync.* LED states

 

 

 

 

are defined as follows: Blink - alternating ON for ~100ms and OFF

 

 

 

 

for ~2 seconds; Flash - alternating ON for ~500ms and OFF for

 

 

 

 

~500ms. Flutter - like flash but with shorter ~100ms ON and OFF

 

 

 

 

times.

 

 

 

* LED states are defined as follows: Blink - alternating ON for ~100ms and OFF for ~2 seconds; Flash - alternating ON

for ~500ms and OFF for ~500ms. Flutter - like flash but with shorter ~100ms ON and OFF times.

 

 

 

 

Rear-Panel

The U4600 also has two LED (light-emitting diode) indicators on the rear panel. They pro-

LEDs

vide the following indications:

 

LAN

Green LED: ON if active LAN connection detected. OFF otherwise.

Front Panel Audio Monitor

ACT Yellow LED: Flashing ON if ethernet packets are output or addressed packets are input. OFF otherwise.

To monitor audio output from the front panel, insert a 1/4-inch stereo phone plug into the audio monitor port. The U4600 will detect the phone plug and immediately display the Audio FP (front-panel) Monitor Selection screen. This second-level menu screen allows the user to select and monitor the desired audio stream. After two minutes without a keypress from the front panel, the U4600 will revert to the default LCD screen.

800032-01 Rev. F

30

www.wegner.com

Image 38
Contents UNITY4600 800032-01 Rev. F Iii This page intentionally blank Table of Contents List of Figures List of Tables 800032-01 Rev. F Viii Manual Overview Unity 4600 User’s ManualProduct Overview Unity 4600 Professional Media RecorderCharacteristic Specification Unity 4600 Product SpecificationsTechnical Specifications Front Panel Monitors Audio OutputDtmf Output Serial PortsFront Panel E-Mails Alarm/Cuing RelaysEthernet Ports ChassisCharacteristic Transport-In OptionsTurbo PSK Receiver Option, Broadcom Protocols DVB-QPSK Receiver with 4-Port RF Switch OptionSwitched RF Inputs Turbo Receiver with 4-Port Switch Option RF Switch Input DVB-QPSKGlossary of Terms Safety SummaryGlossary of Terms and Abbreviations Term DefinitionBoot loader RecoveryOr Recovery AutomatedMode Presets TableNetwork Protection PES StreamSetting, Last Service DescriptorService Settings CommandedLocation and Mounting Your warrantyUnpacking and Inspection Mandated Suppression Radio Frequency EmissionsDesktop Installation Mechanical LoadingU4600 Connections See .2 for Transport Options for this slotComposite Video Out Rear Panel ConnectorsConnector Type Pin Signal Name Designation Alarm Cuing Serial ControlTurbo-PSK with 4-way RF Switch Transport In Option Connector Type Pin Signal Name Designation EthernetDVB-QPSK with 4-way RF Switch Transport In Option 115/230 VACSerial Port Configuration Aux Data Device Handling Terminal I/OModem I/O Printer OuputInstallation Testing VOLnnnnnnnnnnnnn Relay Pulse CheckThis page intentionally left blank Functional Summary Automated Recovery Theory of OperationUnity 4600 Functional Block Diagram Monitoring and ControlOperation from Front Panel LCD Screen RelationshipsLCD Screen Content LCD Screen RelationshipSummary of Top-Level LCD Screens and Their Functions Download Screen as Default Home Default ScreensScreen Name Functions/Applications Unit Setup Audio FP Monitor Selection Screen as DefaultInterpreting Front Panel LEDs Front-Panel LED Indicator DescriptionsIndicator Label Color and State Meaning Rear-Panel Front Panel Audio MonitorOverview and Syntax CommandsOperation from Local/Remote Terminal UserAud1rt Same as aud1rt above Audmon port# Dels entryGhostlist action PID Dtmfvol percentForcerf port LAN Gateway addr LAN IP addrLAN Subnet addr LAN Mode mode Mode DHCP, WEG, or StaticLatchalarms Lnbpwr outputASI Loadnv sourceOr O Partpid pidPassword One to six alphanumeric characters Permch valueState ON, OFF, or WRpath from domain Rpath Relay addrRpath to username@addr SET from source PortRoute Setlabel labelSetpedest Settimeout source timeSource Setpin valueCommand displays internal unit temperature if available Unmute sourcesourcesource Alarm LED On and Carrier LED Off MaintenanceGeneral Troubleshooting Alarm and Warning LEDs Off Alarm and Carrier LEDs Both OnAlarm or Warning LED On Alarms and Warnings Alarm and Warning DescriptionsProblem Content for ASI N/AContent Routing High Error RateIP Address Conflict Invalid VBI Data FmtInvalid Video Format KMS Stream LostNo Genlock Sync No RF SignalNo Dhcp Server Found No ID Tag FoundTest Mode in Use RF Signal OverloadSetting Out of Range PMT DisappearedVideo Not Found Video Buff OverflowVideo CMD Muted Video PES Data LostWarranty Technical SupportThis page intentionally left blank Info Screens Menu ScreensMisc Setups Parameter ScreensIndex LED Questions Rack This page intentionally left blank
Related manuals
Manual 75 pages 30.76 Kb

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.