Wegener Communications 4600 Home Default Screens, Screen Name Functions/Applications Unit Setup

Page 36

UNITY 4600 USERS MANUAL

Table 3.1: Summary of Top-Level LCD Screens and Their Functions

Screen Name

 

Functions/Applications

 

 

Unit Setup

Allows user to control unit. Typical controls located under this menu

 

include:

 

• Set permanent unit settings (tuning, program, audio selection)

 

Add/edit/move/delete Presets

 

NTSC Pedestal

 

• Buffer control (PCR offset)

 

Audio attenuation

 

• Audio front-panel monitor select

 

Muting

 

• VBI line re-insertion enable

 

Recovery mode timeouts

 

Serial port setup

 

• LNB LO frequency set

 

• LNB DC power set

 

User cue relays

 

• Signal quality indicator thresholds

 

• Minimum alarm/warning indication times

 

LAN settings

 

NVRAM operations

 

• Alarm (history) latching enable

 

• Program Mapping Ghost PID pass list

 

• Current unit software selection

 

Unit label edit

 

Unit reset

 

 

 

Home and

Default

Screens

The home screen appears on the LCD by default at boot up. During operation, the user may return to the home screen at any time, from any location in the menu hierarchy, by pressing the Escape (ESC) button repeatedly (or pressing and holding it). Regardless of the current location within the LCD menu hierarchy, if no front-panel keypress is made for more than 5 minutes, the LCD reverts to the default screen. Usually, this is the home screen. However, under some conditions (two are described below), another screen becomes the default. If more than one of these conditions exist simultaneously, priority is given in the order listed.

NOTE: Regardless of which screen is the current default, the user may still access all available screens using the left- and right-arrow, ENT and ESC buttons.

Download Screen as Default

If the U4600 is in an ACCEPT PACKETS Download state, then the Download screen becomes default.

Audio FP Monitor Selection Screen as Default

For two minutes, or until ESC is pressed, the Level 2 Audio FP Monitor Selection screen is the default if the unit features a front-panel audio monitor jack and the user plugs in a ¼” stereo phone plug.

NOTE: This is NOT usually a first-level screen, unlike other default examples.

800032-01 Rev. F

28

www.wegner.com

Image 36
Contents UNITY4600 800032-01 Rev. F Iii This page intentionally blank Table of Contents List of Figures List of Tables 800032-01 Rev. F Viii Manual Overview Unity 4600 User’s ManualProduct Overview Unity 4600 Professional Media RecorderUnity 4600 Product Specifications Technical SpecificationsCharacteristic Specification Audio Output Dtmf OutputFront Panel Monitors Serial PortsAlarm/Cuing Relays Ethernet PortsFront Panel E-Mails ChassisCharacteristic Transport-In OptionsDVB-QPSK Receiver with 4-Port RF Switch Option Switched RF InputsTurbo PSK Receiver Option, Broadcom Protocols Turbo Receiver with 4-Port Switch Option RF Switch Input DVB-QPSKSafety Summary Glossary of Terms and AbbreviationsGlossary of Terms Term DefinitionRecovery Or RecoveryBoot loader AutomatedPresets Table Network ProtectionMode PES StreamService Descriptor Service SettingsSetting, Last CommandedYour warranty Unpacking and InspectionLocation and Mounting Mandated Suppression Radio Frequency EmissionsDesktop Installation Mechanical LoadingU4600 Connections See .2 for Transport Options for this slotRear Panel Connectors Connector Type Pin Signal Name Designation Alarm CuingComposite Video Out Serial ControlConnector Type Pin Signal Name Designation Ethernet DVB-QPSK with 4-way RF Switch Transport In OptionTurbo-PSK with 4-way RF Switch Transport In Option 115/230 VACSerial Port Configuration Device Handling Terminal I/O Modem I/OAux Data Printer OuputInstallation Testing VOLnnnnnnnnnnnnn Relay Pulse CheckThis page intentionally left blank Functional Summary Automated Recovery Theory of OperationUnity 4600 Functional Block Diagram Monitoring and ControlOperation from Front Panel LCD Screen RelationshipsLCD Screen Content LCD Screen RelationshipSummary of Top-Level LCD Screens and Their Functions Home Default Screens Screen Name Functions/Applications Unit SetupDownload Screen as Default Audio FP Monitor Selection Screen as DefaultFront-Panel LED Indicator Descriptions Indicator Label Color and State MeaningInterpreting Front Panel LEDs Rear-Panel Front Panel Audio MonitorCommands Operation from Local/Remote TerminalOverview and Syntax UserAud1rt Same as aud1rt above Audmon port# Dels entryDtmfvol percent Forcerf portGhostlist action PID LAN Gateway addr LAN IP addrLAN Mode mode Mode DHCP, WEG, or Static LatchalarmsLAN Subnet addr Lnbpwr outputASI Loadnv sourceOr O Partpid pidPassword One to six alphanumeric characters Permch valueState ON, OFF, or WRpath from domain Rpath Relay addrRpath to username@addr Port RouteSET from source Setlabel labelSettimeout source time SourceSetpedest Setpin valueCommand displays internal unit temperature if available Unmute sourcesourcesource Maintenance General TroubleshootingAlarm LED On and Carrier LED Off Alarm and Carrier LEDs Both On Alarm or Warning LED OnAlarm and Warning LEDs Off Alarms and Warnings Alarm and Warning DescriptionsContent for ASI N/A Content RoutingProblem High Error RateInvalid VBI Data Fmt Invalid Video FormatIP Address Conflict KMS Stream LostNo RF Signal No Dhcp Server FoundNo Genlock Sync No ID Tag FoundRF Signal Overload Setting Out of RangeTest Mode in Use PMT DisappearedVideo Buff Overflow Video CMD MutedVideo Not Found Video PES Data LostWarranty Technical SupportThis page intentionally left blank Info Screens Menu ScreensMisc Setups Parameter ScreensIndex LED Questions Rack This page intentionally left blank
Related manuals
Manual 75 pages 30.76 Kb

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.