Wegener Communications 4600 manual Audmon port#, Dels entry

Page 41

UNITY 4600 USER’S MANUAL

Table 3.3: Command Directory for U4600 Terminal Commands

AUDIOMODES

Lists all the supported audio decompression or pass-through modes (e.g., MPEG1 Layer 2, Dolby AC-3, MP3, SMPTE302, etc.)

AUDMON port#

port#: Either 1 or 2 for audio ports 1 or 2.

Connects a sample of audio port port# to the single audio monitor jack (where available). A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

AUXPID [PID]

PID: Selects the PID (in hex) for the transport packets carrying the desired data stream. Must be 20 to 1FFE inclusive. If PID is omitted, the current value is displayed.

Sets the PID used for Aux Data extraction.

CLRDIAG

Clears all the volatile counts and statistics, as if the unit was reset. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

CLRIND

Clears both current “Acknowledged” Alarm and Warning indications and (past) Latched Alarm indications. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

DELS entry

entry: Value from 1 up to max (given in section 2.1) indicating entry number in settings table.

Deletes an entry in the Preset Table.

DPAT

Command reports current Program Allocation Table (PAT) from incoming transport stream.

DPSI

Command reports complete PSI information tracing all programs and their components to MPEG PIDs. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

DTMFTST [level] [tone]

level : Integer between 0 and 100 inclusive.

tone: Tone code (0-15signifying digits 1-9,0,*,#,A-C).

Volatile test command for DTMF output, if supplied. Tones will be output at the percentage of full-scale voltage indicated by level. If tone is supplied, then that tone is output continuously. If tone is omitted, then the IRD cycles endlessly through all tones, 1 second per tone. Disable with TESTOFF command. A Local Control Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the network).

www.wegener.com

33

800032-01 Rev.F

Page 40 Page 42
Image 41
Page 40 Page 42
Contents UNITY4600 800032-01 Rev. F Iii This page intentionally blank Table of Contents List of Figures List of Tables 800032-01 Rev. F Viii Unity 4600 User’s Manual Manual OverviewUnity 4600 Professional Media Recorder Product OverviewCharacteristic Specification Unity 4600 Product SpecificationsTechnical Specifications Dtmf Output Audio OutputFront Panel Monitors Serial PortsEthernet Ports Alarm/Cuing RelaysFront Panel E-Mails ChassisTransport-In Options CharacteristicTurbo PSK Receiver Option, Broadcom Protocols DVB-QPSK Receiver with 4-Port RF Switch OptionSwitched RF Inputs DVB-QPSK Turbo Receiver with 4-Port Switch Option RF Switch InputGlossary of Terms and Abbreviations Safety SummaryGlossary of Terms Term DefinitionOr Recovery RecoveryBoot loader AutomatedNetwork Protection Presets TableMode PES StreamService Settings Service DescriptorSetting, Last CommandedUnpacking and Inspection Your warrantyLocation and Mounting Mandated Suppression Radio Frequency EmissionsMechanical Loading Desktop InstallationSee .2 for Transport Options for this slot U4600 ConnectionsConnector Type Pin Signal Name Designation Alarm Cuing Rear Panel ConnectorsComposite Video Out Serial ControlDVB-QPSK with 4-way RF Switch Transport In Option Connector Type Pin Signal Name Designation EthernetTurbo-PSK with 4-way RF Switch Transport In Option 115/230 VACSerial Port Configuration Modem I/O Device Handling Terminal I/OAux Data Printer OuputInstallation Testing Relay Pulse Check VOLnnnnnnnnnnnnnThis page intentionally left blank Theory of Operation Functional Summary Automated RecoveryMonitoring and Control Unity 4600 Functional Block DiagramLCD Screen Relationships Operation from Front PanelLCD Screen Relationship LCD Screen ContentSummary of Top-Level LCD Screens and Their Functions Screen Name Functions/Applications Unit Setup Home Default ScreensDownload Screen as Default Audio FP Monitor Selection Screen as DefaultInterpreting Front Panel LEDs Front-Panel LED Indicator DescriptionsIndicator Label Color and State Meaning Front Panel Audio Monitor Rear-PanelOperation from Local/Remote Terminal CommandsOverview and Syntax UserAud1rt Same as aud1rt above Dels entry Audmon port#Ghostlist action PID Dtmfvol percentForcerf port LAN IP addr LAN Gateway addrLatchalarms LAN Mode mode Mode DHCP, WEG, or StaticLAN Subnet addr Lnbpwr outputLoadnv source ASIPartpid pid Or OPermch value Password One to six alphanumeric charactersON, OFF, or W StateRpath Relay addr Rpath from domainRpath to username@addr Route PortSET from source Setlabel labelSource Settimeout source timeSetpedest Setpin valueCommand displays internal unit temperature if available Unmute sourcesourcesource Alarm LED On and Carrier LED Off MaintenanceGeneral Troubleshooting Alarm and Warning LEDs Off Alarm and Carrier LEDs Both OnAlarm or Warning LED On Alarm and Warning Descriptions Alarms and WarningsContent Routing Content for ASI N/AProblem High Error RateInvalid Video Format Invalid VBI Data FmtIP Address Conflict KMS Stream LostNo Dhcp Server Found No RF SignalNo Genlock Sync No ID Tag FoundSetting Out of Range RF Signal OverloadTest Mode in Use PMT DisappearedVideo CMD Muted Video Buff OverflowVideo Not Found Video PES Data LostTechnical Support WarrantyThis page intentionally left blank Menu Screens Info ScreensParameter Screens Misc SetupsIndex LED Questions Rack This page intentionally left blank
Related manuals
Manual 75 pages 30.76 Kb

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.
Top Page Image Contents