Pinnacle Design 37T100105 manual Stereo Setting

Chapter 3: Installation and Setup

Notice that all of the columns show Stereo as the logical bus. To create an additional logical output bus, click on the text “Stereo”, choose add new logical output bus, and choose Stereo (Figure 3-28).

Figure 3-28: Stereo Setting

The column now shows Stereo(2). Repeat these steps until you have the number of audio pairs desired. Figure 3-29 shows an audio setup with four logical busses configured. Notice that the logical bus called Stereo(2) corresponds to the sound clips placed on the timeline Name2, the logical bus Stereo(3) corresponds to the sound clips on the timeline Name3, and so on.

Figure 3-29: ,Four Logical Output Busses

32 MMG Installation, Setup, and Operations Guide