Pinnacle Design 37T100105 manual Using XSend, Sequence Name

Chapter 4: Workflow and File Transfer

Using XSend

After editing a sequence, you can use XSend to send the finished clip back to the SAN. The timeline is fused to a single clip that the MediaStream can play out.

Important: Make sure the timeline is configured to the format you wish to use. Timeline Codec Setup is described in detail in Setting up Blue Codecs on page 34.

Determine the name of the sequence you want to send. The name of the sequence appears above the inlay (Figure 4-13).

Figure 4-13: Sequence Name

Locate this sequence in the sequences rack.

Figure 4-14: Sequence Rack

Right click the sequence and choose XSend To->XSend to MSS.

Figure 4-15: XSend menu

58 MMG Installation, Setup, and Operations Guide