Pinnacle Design 37T100105 manual Pending Transfer Tab

Chapter 5: Workflow Scenarios

.

Figure 5-4: Pending Transfer Tab

7.If you want to transfer the whole clip, you can click the Start Xfer button at this time. You have the option of transferring part of a clip. To do this, select the clip in the list, and select the radio button next to one of the three options given (shown in Figure 5-4.)

•The Timecode option allows you to choose the start timecode and duration of the clip that is transferred.

•The Frames option allows you to choose the first frame and number of frames to transfer.

•The Mark In-Out option allows you to transfer the part of the clip between the mark-in timecode and mark-out timecode.

You also have the option of renaming the clip to be transferred in the destination File Name box. After making changes, click the Save Changes button. When all of the changes are made and saved, click the Start Xfer button. While the system is initiating the transfer queue, the list boxes turn dark grey. It is best to wait until the boxes return to light grey backgrounds before proceeding (usually a few seconds depending on the number of files queued).

64 MMG Installation, Setup, and Operations Guide