Install Front Mounts

With Woods LS84 Loader Mount

Attach front mount (32) to the right loader mount using two cap screws (26), hardened flat washers

(23)and hex nuts (27).

23.57817 5/8 Hardened flat washer

26.902 5/8 NC x 2 HHCS GR5

27.230 5/8 NC Hex nut

32. 1026846 Front mount (LS84 only)

Figure 4. Front Mount Installation

With New Holland 14LA Loader Mount or Woods LC96, LC102, 1009, 1012 Loader Mount

NOTE: Front mounts can be installed over the loader mount or loader mount and mid-mount mower bracket. Pictures show mid-mount installed.

1.Remove two bolts connecting loader mount/mid- mount mower bracket to the tractor frame. See Figure 5.

2.Attach left front mount (8) to tractor using two cap screws (20) and hardened flat washers (23). If mid-mount is installed use cap screws (19). See Figure 6.

3.Attach right front mount (9) to tractor using two cap screws (20) and hardened flat washers (23). If mid-mount is installed use cap screws (19). See Figure 7.

Remove

DP3

Figure 5. Remove Hardware - Left Side Shown

DP4

Figure 6. Left Front Mount Installed

Figure 7. Front Mount Installation

8.1013475 Left front mount

9.1026847 Right front mount

19.307430 M16 x 2.0P x 70 mm Cap screw

20307429 M16 x 2.0P x 55 mm Cap screw (use without mid-mount bracket)

23.57817 5/8 Hardened flat washer

6 Installation	MAN0406 (Rev.9/7/2007)