Install Tractor Brackets
With Woods LS84 Loader Mount
1.Place left tractor bracket (2) under left side of tractor. Use a hydraulic floor jack to help raise and hold tractor bracket in position.
2.Attach left tractor bracket (2) to left loader mount using two cap screws (26), hardened flat washers (23), and hex nut (27).
3.Attach tractor bracket to the bottom of rear axle using two cap screws (16), four hardened flat washers (22), hex nuts (15), and modified spacer.
NOTE: Place tractor spacer between ROPS brackets with flange on top.
4.Place right tractor bracket (1) under right side of tractor. Use a hydraulic floor jack to help raise and hold tractor bracket in position.
5.Attach right tractor bracket (1) to front mount (32) using two cap screws (26), hardened flat washers (23), and hex nut (27).
6.Attach tractor bracket to the bottom of rear axle using two cap screws (16), four hardened flat washers (22), hex nuts (15), and modified spacer.
1.1013462 Right tractor bracket
2.1013463 Left tractor bracket
15.1093 1/2 NC Hex nut
16.13563 1/2 NC x 6 Cap screw GR5
22.57816 1/2 Hardened flat washer
23.57817 5/8 Hardened flat washer
26.902 5/8 NC x 2 Cap screw GR5
27.230 5/8 NC Hex nut
32. 1026846 Right front mount
Figure 8. Tractor Brackets Installed with LS84 Loader
MAN0406 (Rev. 9/7/2007) | Installation 7 |
|
|