Hunter Fan ICR owner manual Introduction

Page 5

Introduction................................................................................................

Finally there’s an affordable remote control system designed with the commercial irrigation contractor in mind. Hunter is pleased to introduce the Institutional Commercial Remote (ICR). This rugged remote design offers similar functionality as our SRR remote, but with longer range capability.

With the ICR there’s no need to walk back and forth to the controller to conduct manual watering operations when doing maintenance or repair work on your irrigation systems. Also, winterization can be done quickly and easily with one worker instead of two.

The ICR is designed to be rugged, and water resistant. Its large LCD display and push button design makes it easy to operate. Best of all, with an operating range from ½ to 1 mile, you’ll be able to conduct remote operations on even the largest irrigation systems.

The following instructions provide information on installing, setting up, and operating your ICR.



Image 5
Contents ICR For Use with Hunter Controllers Installation InstructionsPage Table of contents TABLa de contenido Introduction ICR Components SmartPort Carrying Case TransmitterReceiver Installing the SmartPort Wiring Harness SmartPort Wiring HarnessSRC Controller SmartPort Installation Wiring the SmartPort to hunter controllersPro-C Controller SmartPort Installation Blue Red WhitePreparing the Transmitter for Use Typical InstallationsTo change the Run Time Installing the Transmitter BatteriesChanging the Run Time Changing the Maximum Number of Stations Changing the Transmitter AddressTo change the Transmitter address To change the Maximum Number of StationsSRC/Pro-C/ICC Controllers Preparing the Receiver for UseACC/ACC Decoder Controllers Changing the Receiver AddressTo remotely activate a station or program Activating a Station with the ICR Remote SystemMaximizing Operating Range CAUSes Solutions Troubleshooting GuideElectrical Specifications Operating SpecificationsDefault Settings DimensionsPage Presentación del Producto Componentes del ICR SmartPort Caja EmisorReceptor Instalación del Arnés de Cableado SmartPort Conexión de Cableado del Programador SmartPortInstalación SmartPort del Programador Pro-C Azul Rojo BlancoPreparación del Emisor Antes de su Uso Instalaciones TípicasCambio del Tiempo DEL Ciclo de Riego Cambios al Tiempos de RiegoColocación de la Pila del Emisor Modificación del Número Máximo de Estaciones Modificación de la Dirección del EmisorPara Modificar la Dirección del Emisor Para Modificar el Número Máximo de EstacionesProgramadores SRC/Pro-C/ICC Preparación del Receptor Antes de su UsoModificación de la Dirección del Receptor Optimización de la Zona de Funcionamiento Problema Causas Soluciones Guía Para Solucionar ProblemasEspecificaciones de Operación DimensionesEspecificaciones Eléctricas Reglaje por fallaFCC Compliance Notice