Samsung SV-2333X, SV-6332X, SV-2303X Plug & Auto Set Up, AV1EURO AV By means of 21-pin Scart Cable

Page 7

Connecting Your VCR to the Satellite receiver or Other Equipment

Plug & Auto Set Up

You can connect your VCR to the Satellite receiver or other VCR using the SCART cable if the appropriate outputs are available on the equipment chosen. The following illustrations give a few examples of the connection possibilities.

1. AV1(EURO AV): By means of 21-pin Scart Cable

Plug the SCART Cable with satellite receiver or other equipment into the AV1(EURO AV) socket on the rear of the VCR.

After making this connection, select the source by pressing the INPUT button for the AV1 input sources.

2. By means of RF Coaxial Cable

After making this connection, you must preset the station received through the satellite tuner.

RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the VCR, e.g. re-adjust to channel 33.

 

Aerial

 

Satellite Receiver or other Equipment

 

 

Aerial Connector

2

TV

 

AV1(EURO AV)

 

 

 

TV

1

AV1(EURO AV)

 

 

SCART Cable

1. AV2 IN: By means of 21-pin Scart Cable (SV-6333X/SV-2333X only)

When the satellite receiver or other equipment is connected to the AV2 socket, AV2 SET must first be set to EING. (see page 22)

Plug the SCART Cable with satellite receiver or other equipment into the AV2(DECODER/EXT.) socket on the rear of the VCR.

After making this connection, select the source by pressing the INPUT button for the AV2 input sources.

2. By means of RF Coaxial Cable

After making this connection, you must preset the station received through the satellite tuner.

Aerial

Satellite Receiver or other Equipment

2TV

AV1(EURO AV)

SCART Cable

1

AV2(DECODER/EXT.)

TV

AV1(EURO AV)

SCART Cable

Your VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory. The process takes a few minutes. Your VCR will then be ready for use.

1Connect the coaxial cable as indicated on page 10. (Connecting Your VCR to the TV Using the Coaxial Cable)

2Plug the VCR into the mains. It will automatically tune itself in and store TV stations in the memory.

3The process will finish after a few minutes. Then the VCR automatically switches itself off.

GB

TV

2

12

13

Image 7
Contents Video Cassette Recorder About this manual ContentsThis Device is not for USE in Industrial Environments Safety InstructionsPress/push = Step numberFront View of the VCR SV-6333X/SV-6332X/SV-2303X Infrared Remote ControlRear View of the VCR Switched off Display IndicatorAccessories Deciding How to Connect Your VCRYou can connect your VCR to a Hi-Fi system Connecting Your VCR to the TV using the Scart CableAV1EURO AV By means of 21-pin Scart Cable Plug & Auto Set UpBy means of RF Coaxial Cable Tuning Your Television for the VCR Setting the Date and Time Inserting Batteries in the Remote ControlPress or ❿, until Choosing Your Language11 To...Then Have already set them automaticallyIf you Then Clearing a Preset Station Changing the Preset Station Table You can record a cassette at two different speeds Selecting the Recording Speed SV-6333X/SV-6332X OnlySP Standard Play LP Long Play STANDBY/ON Recording a Programme ImmediatelyIf you wish to Then Before presetting your VCRCancelling a Preset Recording Eject Playing a Cassette Intelligent Picture ControlOne Touch Play Then pressMono You can select the mode in which the sound is muteOption Description MIXYou can play a cassette in slow motion No sound is heard when playing back frame by framePlaying a Cassette in Slow Motion Playing a Sequence Frame by FrameNext Etc Seq Playing a Sequence at Variable SpeedsSearching for a Specific Sequence PrevInterval Repeat Play Auto Repeat Play Using the Tape CounterAUS 2HOUR 3HOUR Using the Assemble Edit Function Auto Power OffVCR SV-6333X/SV-6332X SV-2333X/SV-2303X Technical SpecificationsProblems and Solutions Problem Explanation/SolutionSTD TV Frequency Table System-B/G