Playing a Sequence at Variable Speeds
You can vary the playback speed using the Shuttle function (up to nine times the normal speed).
Example: You wish to analyze a sportsperson’s technique, movement by movement.
The Shuttle function is available on the Remote control
➢No sound is heard when playing a sequence at variable speeds.
1Press:
◆❿II during playback
◆SHUTTLE ( 
) to play the cassette backwards
◆SHUTTLE ( 
) to play the cassette forwards
2 |
|
|
|
|
|
| SHUTTLE | ) button, the speed is | ||||
Each time you press a SHUTTLE ( | ||||||||||||
|
| changed as shown in the following illustration. |
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
| |
| REVERSE | REVERSE | REVERSE |
| SLOW | SLOW |
| PLAY | PLAY | PLAY |
| |
| PLAY |
| PLAY | PLAY | STILL | MOTION | MOTION | PLAY | X3 | X7 | X9 |
|
| X9 |
| X7 | X3 |
| X1/10 | X1/5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GB
SLOW
SHUTTLE
V-LOCK
11
Searching for a Specific Sequence
Each time you record a cassette on this VCR, an “index” is automatically marked on the tape when recording starts.
The Search function allows you to
|
| ➞ |
|
|
|
|
|
|
|
| Prev | Seq. being | Next |
|
etc. | Seq. | played | Seq. | etc. |
|
|
|
|
|
2 | 1 | 1 | 2 | |
➢This VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa.
1To search for a specific index, press INDEX.
2Press the ➛➛ or ❿❿ buttons depending on the direction where your desired programme is located. Each time you press the ➛➛ or ❿❿ buttons, the number decreases or increases respectively.
Result: The index number is displayed.
3The VCR starts to search for the point you specified with the ➛➛ or ❿❿ buttons.
Result: When the index is found, cassette playback starts.
➢You can set an index number up to ±20.
CLR/RST | F.ADV |
INPUT | INDEX |
REPEAT | MEN |
C | 1 |
| |
E |
|
R |
|
INDEX : |
|
➛➛!!!!❿❿ |
|
INDEX : - 6
➛➛!!
35