Samsung SV-6332X, SV-2303X, SV-6333X, SV-2333X instruction manual Tuning Your Television for the VCR

Page 8

Tuning Your Television for the VCR

STANDBY/ONEJECT

2SLOW

Q-PRO

SHUTTLEIPC

4

OK

You must tune your television for the VCR only if you are not using a Scart cable

➢To view pictures from your VCR when a Scart cable is used, the television must be set to the audio/video mode (AV).

1Switch on the television.

2Switch on the VCR by pressing STANDBY/ON on the front of the VCR or STANDBY/ON on the remote control.

3Select a programme position on the television to be reserved for use with your VCR.

4Insert the video cassette in the VCR. Check that the VCR starts reading the cassette; if not, press ❿II button.

5Start a scan on your television or set the television to UHF channel 36.

6Fine tune the television until the pictures and sound are obtained clearly.

7If you cannot find the pictures and sound, or there is interference from nearby channels, it may be necessary to change the setting of the VCR output channel (see Solving Problems section of this manual).

8When the picture and sound are perfectly clear, store this channel at the desired programme position on the television.

Result: That programme is now reserved for use with your VCR.

14

Image 8

Contents Video Cassette Recorder Contents About this manualSafety Instructions Press/push= Step number This Device is not for USE in Industrial EnvironmentsRear View of the VCR Infrared Remote ControlFront View of the VCR SV-6333X/SV-6332X/SV-2303X Display Indicator AccessoriesDeciding How to Connect Your VCR Switched offConnecting Your VCR to the TV using the Scart Cable You can connect your VCR to a Hi-Fi systemBy means of RF Coaxial Cable Plug & Auto Set UpAV1EURO AV By means of 21-pin Scart Cable Tuning Your Television for the VCR Inserting Batteries in the Remote Control Setting the Date and TimeChoosing Your Language Press or ❿, untilIf you Then Have already set them automatically11 To...Then Clearing a Preset Station Changing the Preset Station Table SP Standard Play LP Long Play Selecting the Recording Speed SV-6333X/SV-6332X OnlyYou can record a cassette at two different speeds Recording a Programme Immediately STANDBY/ONBefore presetting your VCR If you wish to ThenCancelling a Preset Recording Playing a Cassette Intelligent Picture Control One Touch PlayThen press EjectYou can select the mode in which the sound is mute Option DescriptionMIX MonoNo sound is heard when playing back frame by frame Playing a Cassette in Slow MotionPlaying a Sequence Frame by Frame You can play a cassette in slow motionPlaying a Sequence at Variable Speeds Searching for a Specific SequencePrev Next Etc SeqAuto Repeat Play Using the Tape Counter Interval Repeat PlayVCR Using the Assemble Edit Function Auto Power OffAUS 2HOUR 3HOUR Technical Specifications Problems and SolutionsProblem Explanation/Solution SV-6333X/SV-6332X SV-2333X/SV-2303XTV Frequency Table System-B/G STD