RCA TV/VCR/DVD manual TV operation

TV operation

NOTES:

•If a channel with no broadcast is selected, the sound will automati- cally be muted.

•If a station being viewed stops broadcasting, the TV will automati- cally shut itself off after 15 minutes.

1 To turn on the unit, press POWER.		￿￿￿￿￿￿	￿￿
2 Adjust the volume level by
pressing VOL + or – . The volume
level appears.
3 Set the TV/CATV menu
	TV	- Antenna Connection
option to the appropriate	CATV - CABLE Connection
position. (See page 22.)
Press the number buttons to select			￿￿￿￿￿
4 the channel.

Channels can be instantly selected by using two buttons. (for example, to select channel 2, press “0”, then “2”. If you press only “2”, channel selection will be delayed for a few seconds.)

For channels 10 and above, Press
the 2 digits in order. For example,
to select channel 36, press "36".
You can also press “0”, then the
remaining 2 digits. For example, to
select channel 12, press "012".
For 3 digit numbers, press the 3
digits in order. For example, to
select channel 120, just press
"120".
	TV	CATV
NOTE:	VHF	VHF
	2-13	2-13
To view channels above 69 the
	UHF	STD/HRC/IRC
TV must be set to CATV mode in
	14-69	14-36
the CH SETUP menu. Go to		(A) (W)
page 22 for more information.		37-59
5 CHANNEL +/–		(AA) (WW)
		60-85
		(AAA) (ZZZ)
Press and release CH + or –. The		86-94
channel automatically stops at		(86) (94)
the next channel set into memory.		95-99
		(A-5) (A-1)
Before selecting channels with
		100-125
the CH+ and CH- buttons, you
		(100) (125)
must put the channels into		01
memory. See pages 22 and 23.		(5A)

19