Timer recording
Timer recording can be programmed
Preparation:
•Press TV/VCR to select the TV/VCR mode.
•Load a cassette tape with the erase prevention tab intact.
•Press DISPLAY/CALL to verify that the time and date are correct (see page 36).
Example: Program a timer recording for the 23rd day, channel 125
(CATV), 7:00 - 9:30 PM on timer program number 1 (Tape speed: SLP).
• If the T.REC indicator blinks when the |
timerrecordingended,theTVprogram |
has not been completely recorded |
because of an insufficient tape supply. |
Press TIMER REC to cancel the timer |
program or press EJECT to remove |
the cassette tape. |
• During timer recording standby mode, |
the VCR operation cannot be used. To |
use the VCR operation, press TIMER |
REC to deactivate the timer. After you |
use the VCR, press TIMER REC again |
1 Press TV MENU. Select “TIMER REC SET”, then press ENTER.
2 Press 
or 
to select one of the program line, then press ENTER.
3 Press 
or 
to select the date, then press ENTER.
NOTE:
To set up a daily or weekly timer, go to page 39.
4 Set the start time, end time, channel and tape speed as in step 3.
NOTES:
•Press CANCEL to move cursor backward for correction.
•To record from external source set the channel to "L1" or "L2". "L1" or "L2" will appear next to CH 125 (or 69).
5 To enter other programs, repeat step
2 through 4.
•To return to the normal screen, press TV MENU twice.
M E N U
TIMER REC SET
TV SETUP
CH SETUP
AUTO REPEAT ON
OFF 
SYSTEM SETUP
〈▲/▼/ENTER/MENU〉
- | |||
- | |||
- | |||
- | |||
- | |||
- |
-----
/ /ENTER/CANCEL/MENU
TIMER REC SET |
|
|
| |||
| DATE | 23 (THU) |
| |||
| START | 8 : 30 AM |
| |||
| END |
|
| |||
| CH | 012 |
|
|
| |
SPEED | SP |
|
|
| ||
| / /ENTER/CANCEL/MENU | |||||
TIMER REC SET |
|
|
| |||
| DATE | 23 | (THU) |
| ||
| START | 7 | : 00 PM |
| ||
| END | 9 | : 30 PM |
| ||
| CH | 125 |
|
|
| |
SPEED | SLP |
|
| |||
/ /ENTER/CANCEL/MENU | ||||||
23 | TH | 7:00PM 9:30PM 125 SLP | ||||
- | ||||||
- | ||||||
- | ||||||
- | ||||||
- | ||||||
- | ||||||
-----
/ /ENTER/CANCEL/MENU
to put the VCR into timer recording |
standby mode. |
• If you press TIMER REC during timer |
recording, the recording operation will |
be interrupted. If you press TIMER |
RECagainwithintheprogrammedtime, |
the recording operation will start again. |
• After a power failure or disconnection |
of the power plug, all programmed |
recording settings and time display |
will be lost upon resumption of power. |
In this case, reset the clock (see pages |
recordings. |
6 Press TIMER REC. The T.REC indicator will light and the VCR stands by for recording.
The timer recording will start at 5 seconds before the time you predetermined.
NOTES:
•If the T.REC indicator does not light in spite of the pressing of TIMER REC, the cassette may not have been loaded yet. (see page 31)
•If the cassette is ejected in spite of the pressing of TIMER REC, the erase prevention tab of the cassette may have been removed. (see page 31)
38