Sylvania 6313CG owner manual To Change Clock Setting, Automatic Clock Setting, Clock CH Search

_ _

– AUTO CLOCK CH SEARCH –

6 Select the hour	– MANUAL CLOCK SET –
Use [PLAY/K] or [STOP/L] until	MONTH DAY			YEAR
your desired hour appears.	0 5	/ 0 4	THU	2 0 0 6
(Example: “05”, “PM”)	HOUR	MINUTE
Then press [F.FWD/ B].	0 5	: – –	PM
7 Select the minute	– MANUAL CLOCK SET –
Use [PLAY/K] or [STOP/L] until	MONTH DAY			YEAR
	0 5	/ 0 4	THU	2 0 0 6
the desired minute appears.
	HOUR	MINUTE
(Example: “40”)
	0 5	: 4 0	PM

1 Select “SETTING CLOCK”	– M E N U –
Press [MENU].	TIMER PROGRAMMING
	PICTURE CONTROL
Use [PLAY/K] or [STOP/L] to	B SETTING CLOCK
	USER’S SET UP
	CHANNEL SET UP
select “SETTING CLOCK”, then	V-CHIP SET UP
	CAPTION [OFF]
	LANGUAGE [ENGLISH]
press [F.FWD/ B].	ZERO RETURN
	TIME SEARCH
2 Set “AUTO CLOCK” to [ON]	– SETTING CLOCK –
Press [F.FWD/ B] until “AUTO	AUTO CLOCK CH SEARCH
	B AUTO CLOCK	[ON]
CLOCK [ON]” appears.	AUTO CLOCK CH	[ 02 ]
	MANUAL CLOCK SET
	D.S.T.	[OFF]

8Start the clock

5:40 PM

Press [MENU].

Although seconds are not dis- played, they begin counting from

00when you press [MENU]. Use this feature to synchronize the clock with the correct time.

NOTE:

• When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock, 1)Follow steps 1 to 2 on page 13.

2)Select the item you want to change using [REW/s] or [F.FWD/ B].

3)Enter correct numbers using [PLAY/K] or [STOP/L].

4)Press [MENU] to start the clock.

NOTE:

•If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and use [REW/s] or [F.FWD/ B] to turn [OFF] this func- tion. Then you can manually adjust the clock.

AUTOMATIC CLOCK SETTING

Make sure ...

• The unit must be turned on.

3Begin “AUTO CLOCK CH SEARCH”

Press [STOP/L] to select “AUTO	– SETTING CLOCK –
CLOCK CH SEARCH”.	AUTO CLOCK	[ON]
Then press [F.FWD/ B].
	B AUTO CLOCK CH SEARCH
	AUTO CLOCK CH	[ 02 ]
• The unit begins searching for the	MANUAL CLOCK SET
	D.S.T.	[OFF]

station which contains the auto clock set signal. The search for a signal may take up to 20 seconds per channel.

•When the search has ended, “_ _” 08 10 13 appears at the lower left of the

screen.

•Write down the number(s) that

appear on the screen. They are the auto clock sta- tion(s) in your area.

•If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 13. Press [MENU] to exit the screen.

NOTE:

•During AUTO CLOCK CH SEARCH, the picture may be distorted.

4Enter the channel number that contains the Automatic Clock Setting Signal

Follow step 1 above to select “SET-

• Confirm the unit is receiving a RF (Radio

TING CLOCK” menu.

– SETTING CLOCK –

Frequency) signal from either an antenna or cable

system connection using the ANT. jack on the rear

of the unit.

NOTES:

•If a cable converter box is being used, make sure it is powered on.

•You must use the remote control to perform the clock setting procedure.

•If the unit is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself and the unit must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically.

Press [STOP/L] to select “AUTO	AUTO CLOCK	[ON]
	B AUTO CLOCK CH	[ 45]
	AUTO CLOCK CH SEARCH
CLOCK CH”.	MANUAL CLOCK SET
	D.S.T.	[OFF]

Use [REW/s] or [F.FWD/ B] until you locate Auto Clock Set sta-

tion number that you wrote down at step 3. Press [MENU] to exit the screen.

5Turn off the unit

Once the unit is turned off, it will periodically check and set the correct date and time.

- 13 - EN