Sylvania 6313CG Normal Playback, Tracking Adjustment, Still Picture, Vertical Hold Control

Page 18

PLAYBACK

NORMAL PLAYBACK

Make sure ...

•The unit must be turned on.

1Insert a prerecorded tape

If the erase-prevention tab has been removed, the unit will start playback automatically.

2To begin playback

Press [PLAY/K].

PLAY B

NOTE:

•If any menu is activated on the screen, [PLAY/K] does not func-

tion. Press [MENU] to exit the menu. Then, press [PLAY/K].

3 To stop playback

STOP

Press [STOP/L].

TRACKING ADJUSTMENT

•Tracking adjustment will be set automatically (Digital Auto Tracking function) when you start playback.

•Noise lines (black and white streaks) may appear on the playback picture when playing pre-recorded tapes or tapes recorded on other VCR. If this occurs, use [CHANNEL K/L] until the streaks disappear. To return to the Digital Auto Tracking function, stop the tape once and start playback.

STILL PICTURE

You can view a still picture on the TV screen during playback (the Still mode). Press [PAUSE/STILL F] during playback. Only tapes recorded in the SLP mode will show the least amount of lines. Press [PLAY/K] to return to playback.

NOTES:

•Usually there will be video “noise” lines (black and white streaks or dots) on the screen. This is normal.

If the tape was originally recorded in SP or LP mode, the still picture will be black and white in addition to the “noise” lines.

This is not a fault of the machine, but is a by- product of the technology involved in producing a unit with 2 video heads.

•If the unit is left in the Pause mode for more than 5 minutes, the unit will automatically switch to the stop mode.

NOISE CANCEL (in the Still mode)

This feature allows you to reposition or reduce the noise lines of a still picture. Press [PAUSE/STILL F] so that the noise lines change position on the screen so you can see the picture in its entirety with- out distracting noise lines.

NOTE:

•This feature can be activated ONLY when viewing a tape recorded in the SLP mode. If the tape was originally recorded in the SP or LP mode, the still picture may revert to black and white in addition to the “noise bars”. This is normal.

VERTICAL HOLD CONTROL

In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by using [CHANNEL K/L].

NOTE:

•If there are video noise lines on the screen, reposi- tion or reduce them. Refer to “NOISE CANCEL” above.

EN

- 18 -

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 6313CG Important Safeguards S2 8 9 8 a Moisture Warning PrecautionsLocation Important Copyright InformationTable of Contents IndiceFeatures Supplied AccessoriesRemote Control Operating Controls and FunctionsInstalling the Batteries Battery PrecautionsPreparation for USE ANTENNA/CABLE ConnectionsWatching a TV Program TV Operation and SettingsUsing Front A/V Input Jacks To Watch Cable or Satellite ChannelChannel SET UP Auto Channel ProgrammingADDING/DELETING Channels Clock SET UP Auto / Manual Manual Clock SettingPicture Control Clock CH Search To Change Clock SettingAutomatic Clock Setting Clock CHWake UP Timer Sleep TimerDAYLIGHT-SAVING Time Closed Caption System Game ModeMenu Language DegaussingTV Rating SET UP Chip SET UPChip SET UP Mpaa Rating SET UPVideo Cassette Normal Playback Tracking AdjustmentPlayback Still PictureSpecial Playback To Cancel the Rental ModeTo Cancel the Repeat Play Mode Rental PlaybackZero Return To Cancel During Time SearchSearch Picture SearchSpecial Features RecordingUse the Number buttons or Channel K/L Times Display Recording lengthFWD/ B Timer RecordingAutomatic Timer Recording PLAY/K, then press F.FWD/ BAuto Return Status Display On Screen DisplayCable Channel Designations Checking the StatusTroubleshooting Guide Problem Corrective ActionClosed Caption Problem Possible Remedy Specifications MaintenanceControles DE Operación Y SUS Funciones NotaMando a Distancia Conexiones DE ANTENA/CABLE Preparación Para LA UtilizaciónFunciones Y Ajustes Ajuste DEL RelojGrabación Normal Idioma DEL MenúReproduccion Normal NotasFunai Corporation Warranty Statement Regarding NON Authorized RepairsDuration Tel
Top Page Image Contents