VIDEO CASSETTE
This unit will operate with any cassette that has the 
mark. For best results, we recommend the use of
PRECAUTIONS
•Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or vice versa. Before using a tape with these conditions, to avoid damage of the tape and your unit, wait until the tape has warmed to room temperature and the moisture has evaporated.
•Avoid extreme heat, high humidity and magnetic fields.
•Do not tamper with the cassette mechanism.
•Do not touch the tape with your fingers.
TWO DIFFERENT TAPE SPEEDS
Before recording, select the tape speed from : SP mode (Standard Play) or SLP mode (Super Long Play).
The table below shows the maximum recording/play- back time using T60, T120 or T160 tapes in each mode.
Tape Speed | Recording/Playback Time | |||
|
|
|
|
|
| Type of tape | T60 | T120 | T160 |
|
|
|
|
|
SP mode | 1 hour | 2 hours | ||
|
|
|
|
|
SLP mode | 3 hours | 6 hours | 8 hours | |
|
|
|
|
|
NOTE:
•You can play back a tape recorded in LP mode (Long Play).
INSERTING A CASSETTE
Insert the cassette in the direction as shown. Push in gently, but continuously, on the
Window
CORRECTWRONG
REMOVING A CASSETTE
1)In the stop mode, press [STOP/EJECT P N] on the unit. The cassette will be ejected.
2)Pull the cassette out of the cassette compartment. 3)Store the cassette in its case as shown.
ERASE PREVENTION
You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette.
Tab
If you decide to record on the tape again, cover the hole with plastic tape.
Plastic Tape
NOTE:
•If the cassette without tab is inserted, playback will automatically start.
- 17 - | EN |