Magnavox MC192DMG, MC132DMG Adding/Deleting Channels, Steps, Press the CHannel o/p buttons or

MC132DMG/MC192DMG 3/22/02 1:21 PM Page 11

Automatic Channel Setup (cont’d) 11

Adding/Deleting Channels

If your channel lineup changes, you may want to add newly available channels or remove channels that are no longer available in your area. You can use the CH(annel) o/p but- tons to scroll through only the available channels. To add or delete channels from the TV/VCR’s memory, follow these

POWER

steps.

1	Press the MENU button.		1
				REW
	> PRIM. SETUP	PRESS B
	VCR PROGRAM			MENU
	VCR SETUP
	CAPTION
	REMINDER			1
	BRIGHTNESS

2,4

SLEEP/WAKE UP

PLAY

F.FWD 5

STOP

STATUS/EXIT CLEAR

2 3

2 Press the PLAY/o button or the STOP/p but- ton to select CHANNEL.

4	5	CH.	3
		6
7	8	9
	0	ALT.CH VOL.
SPEED	MEMORY	PAUSE/STILL

TO ADJUST PRESS { / B CH123

>	CHANNEL	SAVED
	SMARTLOCK
	REVIEW
	EXIT
	PRIM. SETUP
	VCR PROGRAM

REC/OTR TRACKING MUTE

Press the CH(annel) o/p buttons or the
Number buttons to select the channel you want
3 to add or delete.
	TO ADJUST PRESS { / B
	CH23
			SAVED
	>	CHANNEL
		SMARTLOCK
		REVIEW
		EXIT
		PRIM. SETUP
		VCR PROGRAM

4 Press the F.FWD/B button or the REW(ind)/{ button to select SAVED (to add that channel) or DELETED (to delete that channel).

Repeat steps 3-4 to add or delete other channels.

5 Press the STATUS/EXIT button. Programming of the channel you added or deleted will appear.

Helpful Hint

•To review the memorized chan- nels, follow these steps.

1)Press the MENU button.

2)Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Press the F.FWD/B button.

3)Press the PLAY/▲ button or the STOP/▼ button to select CH MEMORY REVIEW. Press the F.FWD/B button. A list of programmed channels will appear on the screen.

4)If all the programmed channels don’t fit on the screen, press the F.FWD/B button. If you do not press the F.FWD/B button within 10 seconds, the remaining chan- nels will appear on the screen. (If there are no remaining channels, the previous menu will appear.) Or press the REW(ind)/{ button to see the previous screen of channels.

5)Press the STATUS/EXIT button once or twice.