Magnavox MC192DMG, MC132DMG Read and follow the steps below to record a TV program, Hrs, Tape

Page 29

MC132DMG/MC192DMG 3/22/02 1:21 PM Page 29

Read and follow the steps below to record a TV program.

1 Place a tape with its record tab intact (see page five) in the TV/VCR. The power will come on. If the tape is already in the TV/VCR, press the POWER button to turn on the TV/VCR, if nec- essary.

2 Press the SPEED button until the desired tape speed appears on the TV/VCR screen. See tape speed details below.

3 Use the CH(annel) o/p buttons or the

Number buttons to select the channel you want to record. You cannot change channels during record- ing.

4 Press the REC(ord)/OTR button once to start recording. The Record light will glow.

●If there is not a tape in the TV/VCR, NO CASSETTE flashes on the screen briefly.

●If the tape does not have a record tab, PROTECTED CASSETTE CANNOT RECORD flashes on the screen briefly. The TV/VCR will eject the tape. Cover the tab with cellophane tape or insert another cassette.

5 To pause the recording (for example, during commercials), press the PAUSE/STILL button. The Record light will flash. To resume recording, press the PAUSE/STILL button again or the REC(ord)/OTR button. The Record light will glow.

6 To stop recording, press the STOP/▼ button.

Tape Speeds

This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. A tape will play only in the speed in which it was recorded. When recording, you can change the tape speed using the SPEED button. You cannot record in LP speed.

The slower the speed, the more programming you can fit on the tape. SLP is the slowest speed.

 

Cassette type / Playback Time

Tape Speed

T160

T120

T60

SP(Standard Play)

2 hrs.

2

hrs.

1 hr.

 

40 mins.

 

 

 

 

LP(Long Play)

5 hrs.

4

hrs.

2 hrs.

(playback only)

20 mins.

 

 

 

 

 

 

 

 

SLP(Super Long Play)

8 hrs.

6

hrs.

3 hrs.

 

 

 

 

 

 

 

 

 

Recording 29

 

1

 

 

 

 

 

POWER

 

SLEEP/WAKE UP

 

 

 

 

PLAY

 

6

 

REW

 

F.FWD

 

 

 

STOP

 

 

MENU

STATUS/EXIT

CLEAR

 

1

2

3

 

 

 

4

5

6

CH.

3

 

 

2

7

8

9

 

 

0

ALT.CH

VOL.

SPEED MEMORY PAUSE/STILL

 

 

4

REC/OTR

 

TRACKING

 

5

 

 

 

 

Helpful Hints

•You cannot record one channel while watching another.

•Recording options are on pages 30-36.

•You cannot record if DEFEAT RECORDING is ON. (REC DEFEATED will flash on the screen.) Details are on page 36.

•If you pause a recording for more than five minutes, the TV/VCR will switch to Stop mode automatically to protect the video cassette tape from damage.

•You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the

tape.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents MC132DMG/MC192DMG Model No Serial No Dear Magnavox product ownerFor Customer Use Safety Precautions FeaturesIntroduction Declaration of ConformityTable of Contents Battery Safety Putting Batteries in the Remote ControlUsing the Remote Control TV/VCR MaintenanceHooking Up the TV/VCR Hook up your TV/VCR using one of the connections shownRF coaxial cable Not supplied Rod AntennaCrooked Pin Straight Pin Hooking Up the TV/VCR cont’dAudio and video cables are not supplied You cannot set up channels if you are using a Cable Box Press the Power button. The TV/VCR willTurning On the TV/VCR Select another channelPress the Menu button Language SelectionPress the Menu button Press the STATUS/EXIT but TonLine Input mode Automatic Channel SetupWait for the TV/VCR to set up channels Steps Adding/Deleting ChannelsPress the CHannel o/p buttons or Repeat steps 3-4 to add or delete other channelsManual Clock Setting Setting the ClockCable Box users must set the clock manually Channels are set. Details are onButtons for the year. For example, for July Setting the Clock cont’dPM, press 09, 30 Automatic PBS Channel Selection Ton to select PRIM. SETUP. Then, pressPress the PLAY/ button or the STOP/ but- 1,4 FWD/B buttonWait for the TV/VCR to find the time NOW Searching flashes on the TV/VCR screenManual PBS Channel Selection Use the Number buttons to select your PBS station Daylight-Savings Time Clock is OFF Time ZoneFront Panel Rear Panel ANTenna Jack AC Power CordDetails are on page six To the TV/VCRRemote Control Buttons STATUS/EXIT Button Clear ButtonSTOP/ Button ALT. CH Alternate Channel ButtonWhen you finish, press the STATUS/EXIT but- ton Refer to the chart onPress the PLAY/ button or the STOP/ but Menus on page 25 will disapDecrease Increase Adjusting the Picture Controls cont’dMore brilliant Decreased brightness If you select Status ON, then select Counter only OFF On-Screen Status Displays If you select Status ON, then select Counter only on If you select Status OFFReminder Follow the steps below to play a tape PlayingTo stop recording, press the STOP/ button Tape Speeds Read and follow the steps below to record a TV programHrs Recording options are on pagesTape is in the TV/VCR. The record tab must be intact One-Touch RecordingTV/VCR will turn off at the end of the OTR Ton on the TV/VCR to stopRerecording Tape Duplication TV/VCR is now in Line Input modeDetails are on Timer RecordingDaily Automatically Follow the instructions in to setRecording’s stop time. AM or PM will be set If Program not Completed appears, start again at step Timer Recording cont’dYou cannot use the Speed button at this time During the power failure Checking or Clearing Timer RecordingsTUS/EXIT button Defeat RecordingFollow the steps below to prevent accidental recording TV programming will appear while the tape is rewinding Play modeRepeat Play Insert a tape in the TV/VCR B Repeat PlayInsert a tape in the TV/VCR Press the Menu button Will become a flashing B PowerCounter will appear on the screen Setting will be lostPlayback Options Still modeForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPSmartlock menu will appear Use the Number buttons to enter your access codeSmartLock SmartLock cont’d Ratings will remain blocked even after a power failureExample Specific Sub-ratings BLOCKED... message appearsUse the Number buttons to enter your desired Use the Number buttons to enter your old access codeSame code in the Confirm Code space Active code againRating Explanations Press the PLAY/o button or the STOP/p button Blue BackgroundTo select Blue BACKGROUND. Then, press FWD/B button repeatedly so that OFF or onSleep timer during a recording Sleep TimerWake Up Timer Volume Bar Menu Screen Closed CaptionExample Sample Picture Half-screen text Sample Picture Standard Closed CaptionsAutomatic Operation Features Glossary Helpful Hints Helpful Hints cont’d Specifications Renewed Index MC132DMG/MC192DMG 3/22/02 121 PM Supplied Accessories
Top Page Image Contents