Magnavox MC132DMG One-Touch Recording, Tape is in the TV/VCR. The record tab must be intact, Otr

Page 30

MC132DMG/MC192DMG 3/22/02 1:21 PM Page 30

30 One-Touch Recording

A One-Touch Recording (OTR) is an immediate timed record- ing from 30 minutes to eight hours long.

Before you begin, make sure:

●Channels are set. Details are on page 10.

●A tape is in the TV/VCR. The record tab must be intact.

1 Use the CH(annel) o/p buttons or the

Number buttons to select the channel you want to record.

2 Press the SPEED button until the desired recording speed (SP or SLP) appears on the screen. Details are on page 29.

3 Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The Record light will appear.

OTR		LENGTH 0:30
CH12
LENGTH	:	PRESS OTR
CANCEL	:	PRESS CLEAR

4 To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR. Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/▼ but- ton on the remote control.

If the end of a tape is reached during an OTR, record- ing will stop. The TV/VCR will turn itself off and eject the tape. The Record light will flash rapidly.

The TV/VCR will turn off at the end of the OTR.

	Press the STOP/EJECT but-
	ton on the TV/VCR to stop
4 the OTR.
	POWER		SLEEP/WAKE UP
			PLAY
	REW		F.FWD
			STOP
	MENU	STATUS/EXIT		CLEAR
		STATUS/EXIT
2	1	2	3		1
	4	5	6	CH.
	4	5	6
	7	8	9
3		0	ALT.CH	VOL.
	SPEED	MEMORY PAUSE/STILL
	REC/OTR		TRACKING	MUTE

Helpful Hints

•To check the time remaining for an OTR, press the STATUS/EXIT button.

•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on the screen.

•You cannot pause an OTR.

•To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR but- ton.

•You cannot record if DEFEAT RECORDING is ON. Details are on page 36.

•You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the

tape.

Image 30

Contents MC132DMG/MC192DMG Dear Magnavox product owner For Customer UseModel No Serial No Introduction FeaturesSafety Precautions Declaration of ConformityTable of Contents Using the Remote Control Putting Batteries in the Remote ControlBattery Safety TV/VCR MaintenanceRF coaxial cable Not supplied Hook up your TV/VCR using one of the connections shownHooking Up the TV/VCR Rod AntennaHooking Up the TV/VCR cont’d Audio and video cables are not suppliedCrooked Pin Straight Pin Turning On the TV/VCR Press the Power button. The TV/VCR willYou cannot set up channels if you are using a Cable Box Select another channelPress the Menu button Language SelectionPress the Menu button Press the STATUS/EXIT but TonAutomatic Channel Setup Wait for the TV/VCR to set up channelsLine Input mode Press the CHannel o/p buttons or Adding/Deleting ChannelsSteps Repeat steps 3-4 to add or delete other channelsCable Box users must set the clock manually Setting the ClockManual Clock Setting Channels are set. Details are onSetting the Clock cont’d PM, press 09, 30Buttons for the year. For example, for July Press the PLAY/ button or the STOP/ but- 1,4 Ton to select PRIM. SETUP. Then, pressAutomatic PBS Channel Selection FWD/B buttonNOW Searching flashes on the TV/VCR screen Wait for the TV/VCR to find the timeManual PBS Channel Selection Use the Number buttons to select your PBS station Daylight-Savings Time Time Zone Clock is OFFFront Panel Details are on page six ANTenna Jack AC Power CordRear Panel To the TV/VCRRemote Control Buttons STOP/ Button Clear ButtonSTATUS/EXIT Button ALT. CH Alternate Channel ButtonPress the PLAY/ button or the STOP/ but Refer to the chart onWhen you finish, press the STATUS/EXIT but- ton Menus on page 25 will disapMore brilliant Adjusting the Picture Controls cont’dDecrease Increase Decreased brightnessIf you select Status ON, then select Counter only on On-Screen Status DisplaysIf you select Status ON, then select Counter only OFF If you select Status OFF Reminder Playing Follow the steps below to play a tapeHrs Read and follow the steps below to record a TV programTo stop recording, press the STOP/ button Tape Speeds Recording options are on pagesTV/VCR will turn off at the end of the OTR One-Touch RecordingTape is in the TV/VCR. The record tab must be intact Ton on the TV/VCR to stopTV/VCR is now in Line Input mode Rerecording Tape DuplicationTimer Recording DailyDetails are on Follow the instructions in to set Recording’s stop time. AM or PM will be setAutomatically Timer Recording cont’d You cannot use the Speed button at this timeIf Program not Completed appears, start again at step Checking or Clearing Timer Recordings During the power failureDefeat Recording Follow the steps below to prevent accidental recordingTUS/EXIT button Play mode Repeat PlayTV programming will appear while the tape is rewinding B Repeat Play Insert a tape in the TV/VCR Press the Menu buttonInsert a tape in the TV/VCR Power Will become a flashing BSetting will be lost Counter will appear on the screenForward and Reverse Searching SP/LP/SLP Still modePlayback Options Super High Speed Searching LP/SLPUse the Number buttons to enter your access code SmartLockSmartlock menu will appear Example Specific Sub-ratings Ratings will remain blocked even after a power failureSmartLock cont’d BLOCKED... message appearsSame code in the Confirm Code space Use the Number buttons to enter your old access codeUse the Number buttons to enter your desired Active code againRating Explanations To select Blue BACKGROUND. Then, press Blue BackgroundPress the PLAY/o button or the STOP/p button FWD/B button repeatedly so that OFF or onSleep Timer Sleep timer during a recordingWake Up Timer Volume Bar Closed Caption ExampleMenu Screen Sample Picture Standard Closed Captions Sample Picture Half-screen textAutomatic Operation Features Glossary Helpful Hints Helpful Hints cont’d Specifications Renewed Index MC132DMG/MC192DMG 3/22/02 121 PM Supplied Accessories