Edimax Technology WP-S1000 specification

2.2) Make software USB Flash (PnS Token) by yourself

**Note: The Software USB flash disk is an option item. We recommend you to build the USB PnS Token from WP-S1000 with your USB flash disk/ pen drive by yourself.

Before start making an USB Flash Disk, please follow the instruction on Quick Installation Guide page 7 to 13 “Step 2ii) Software Installation (From the WPS)”. And then, follow the instruction below to build your USB flash disk/pen drive.

You’ll need:

An USB flash disk/pen drive with capacity larger than 5MB (formatted)

Installed the presentation client software into the USB flash disk/pen drive

Insert the USB flash disk into your computer’s USB port and start the presentation client software. Select ‘Make PnS Token’ from the menu of client software, then follows the instructions to build a new USB flash disk:

1. Click ‘Next’ when setup wizard appears.

2.Click ‘Flash Drive’ dropdown menu to select the drive letter that represents your USB flash disk. If you only have one flash disk inserted, setup wizard should be able to identify the USB flash disk automatically. If the USB flash disk is not correctly identified, please insert the USB flash disk once again, and click ‘Next’.