Edimax Technology WP-S1000 user manual Set Up The Wireless Projector Server WPS To The Internet

6.3 Set Up The Wireless Projector Server (WPS) To The Internet

You can setup the WPS to connect to your router/existing network that has internet connection. By doing this, all computers connected to the WPS wirelessly will be able to access to the Internet via your router. This allows the presenters to enhance their presentations using the information on the Internet.

1)Configure the WPS from the Web Admin by clicking on Admin>Network Setup.

2)Select Use the following IP Address. Configure:

ƒIP Address – Use an IP address that correspond to your router IP range.

ƒSubnet Mask – Use the same Subnet Mask of your router.

ƒDefault Gateway – The IP Address of your router.

3)Select Disable on DHCP Server Setup.

4)Select All Pass on GateKeeper.

5) Click ‘Apply ‘and then click ‘Reboot System’ to save your settings.

47