6.APPENDIX
6.1 Troubleshooting
If you encounter any difficult when using this projector server, eg: the server is not responding or response with strange behaviors, please refer to this troubleshooting table before you contact us or the dealer of purchase, you may be able to solve the problem by yourself and save a lot of time.
Scenario | Possible Solution | |
‘POWER’ LED | 1. | Check ‘PWR’ button located at the back of projector server, it |
does not lit, and |
| should be pressed down; you may also check if the power cable of |
the projector |
| is securely inserted into ‘5V DC’ jack. |
server doesn’t | 2. | If you tried above procedure and the ‘POWER’ LED is still not lit, |
seem to be |
| make sure the wall socket which power adapter connected to is |
working |
| working, you may ask for a qualified electrical technician for help. |
| 3. | If the ‘POWER’ LED is not lit, but other LEDs (WLAN / LAN) are lit, |
|
| please contact your dealer of purchase for assistance. |
| 4. | Contact your dealer of purchase for assistance if all solutions listed |
|
| above do not work. |
Cannot connect to | 1. | Make sure the IP address you used to connect the projector server |
projector server by |
| is correct (refer to Chapter 2.1 for instructions on how to know |
client software or |
| projector server’s IP address). |
web browser | 2. | Please check network cable is correctly and securely connected to |
|
| the LAN jack of projector server, and the ‘LAN’ LED at the front |
|
| panel of projector server is lit. |
| 3. | If you set the projector server to obtain an IP address |
|
| automatically, make sure the DHCP server on your local network is |
|
| working. |
| 4. | If you tried to connect to the projector server via wireless |
|
| connection, make sure you’re connected to the correct access |
|
| point SSID (default SSID of the projector server is ‘WPS’ and it will |
|
| be changed if you modified the wireless setting of the projector |
|
| server). |
| 5. | Switch the projector server off, and switch it on again after 5 |
|
| seconds, then try to connect to the projector server again. You can |
44