AXIS 243Q Blade - Accessing the video server 10
Setting the root password
When accessing the camera for the first time, the Configure Root Password dialog is displayed on the screen.
1.Enter a password and
Note: Before you enter your password at this point, you can secure configuration of the root password via HTTPS by creating a
2.The Enter Network Password dialog appears. Enter the User name: root
Note: The default administrator user name root is permanent and cannot be deleted or altered.
3.Enter the password as set in step 2 above, and click OK. If the password is lost, the camera must be reset to the factory default settings. See “Resetting to the factory default settings”.
If required, click Yes to install the AXIS Media Control (AMC). You will need administrator rights on the computer to do this.
The Live View page
If your AXIS 243Q Blade has been customized to meet specific requirements, the buttons and other items described below may or may not be displayed on the Live View page. The following provides an overview of each available button:
The Video Format
View page to be temporarily changed.
The Output buttons, Pulse and Active/Inactive below, control the output directly from the Live View page. These buttons are configured under Setup > Live View Config >
Layout.
Pulse - click this button to activate the port for a defined period of time, e.g. to switch on a light for 20 seconds.
Active/Inactive - click these buttons to manually start and stop a connected device, such as to switch a light on/off.
The trigger buttons trigger an event directly from the Live View page. These buttons are configured under Setup > Live View Config > Layout. Click these buttons to manually start and stop events.