Dynacord DSP 244 Parameter Link-Table, Description Of Parameters, MASTER EQ1-5, Default

								P A R A M E T E R S
8.1.2 PARAMETER LINK-TABLE
				STANDARD Mode 1)					FULL
									EDIT
									Mode
		Stereo			3 Way	3 Way
		2 Way /	3 Way			Independ.
	Stereo				Mono				Full
		Mono	+			Sub	4 Way	2-In-4
	2 Way				Sub +				Edit
		Sub +	Fullrange			+
					Fullrange
		Fullrange				Fullrange
IN1 / IN2 EQ	YES	YES	N O		Y E S	N O	N O	N O	N O
IN1 / IN2 Delay	Y E S	N O	N O		N O	N O	N O	N O	N O
IN1 / IN2 /	N O	YES	N O		N O	N O	N O	N O	N O
IN1+2 Delay
OUT1 / OUT3 2)	Y E S	N O	N O		N O	N O	N O	N O	N O
OUT2 / OUT4
OUT2 / OUT3 2)	N O	YES	N O		N O	N O	N O	N O	N O

YES: Parameters are linked

NO: Parameters are not linked

The corresponding x-over frequencies and filter characteristics of the XOVER are additionally linked.

1) STANDARD Mode can be selected in the DSP 244 Editor software

2) is true for CHANNEL EQ, COMPRESSOR, LEVEL, XOVER, but not for “Mute”

8.2 DESCRIPTION OF PARAMETERS

The following provides you with a description of all function blocks that can appear in any selected mode including all available parameters, value ranges, and settings. Additional information about the affect of each parameter is provided through the corresponding setting example. When entering the EDIT mode, either the first parameter of the actual program or the parameter that you have edited last are displayed.

MASTER EQ1-5

Both input channels of the DSP 244 employ a 5-Band parametric EQ, each, which provide extreme flexibility in the programming of full range equalization to match the sound reinforcement system to different acoustic conditions and venues which in most cases makes the need for post-mix graphic equalization unnecessary.

	Parameter		Settings / Value range	Default
Type			BYPASS, PEQ, LOSLV, HISLV, HIPASS, LOPASS	BYPASS
		f	20Hz - 20kHz	1.00 kHz
PEQ		Q	0.4 - 20.0	0.7
		Gain	-12dB - +12dB	+0dB
		f	20Hz - 20kHz	1.00 kHz
LOSLV		Slope	6dB, 12dB	6dB
		Gain	-12dB - +12dB	+0dB
		f	20Hz - 20kHz	1.00 kHz
HISLV		Slope	6dB, 12dB	6 dB
		Gain	-12dB - +12dB	+0dB
		f	20Hz - 20kHz	1.00 kHz
LOPASS		Slope	6dB, 12dB	6 dB
		Q	0.4 - 2.0 (for 12dB/octave slope only)	0.7
		f	20Hz - 20kHz	1.00 kHz
HIPASS		Slope	6dB, 12dB	6 dB
		Q	0.4 - 2.0 (for 12dB/octave slope only)	0.7

8-3