Dynacord DSP 244 owner manual Channel Delay

P A R A M E T E R S

CHANNEL DELAY

These delays are provided in the output channels OUT1 - OUT4. They are used to compensate differences in loudspeaker dispersion plains that can be cabinet imminent or result from the positioning of individual loudspeaker cabinets or arrays.

The delay time or acoustical distance is displayed in milliseconds, microseconds, feet, inches, meters, or centimeters. The environmental temperature appears as additional parameter whenever distances are displayed. Thus, up to 3 parameters are available.

	Parameter			Settings / Value range	Default
		0 ms - 900 ms
		0 µs - 900000 µs
Delay		0 feet	-	1014 feet	0 ms
		0 inch	-	12169 inch
		0 m - 309 m
		0 cm - 30910 cm
Unit		ms, µs, feet, inch, m, cm			ms
Temp		-20°C - 60°C			20°C
		-4°F	-	140°F

The Delay parameter determines the delay time of the corresponding channel or the distance between different loudspeaker clusters.

Unit allows the user to select between time or distance display. Distances are automatically converted into delay times plus the calculation additionally includes the influence of the environmental temperature.

Temp allows you to enter a value for the momentary environmental temperature. This parameter appears only when the selected display-unit is distance. The affect of the environmental temperature on the resulting delay time is automatically included in the calculation.

8-11