Setting Oven Controls
Continuous Bake or Twelve Hour Energy Saving Mode
Timer
Setting Continuous Bake or 12 Hour Energy Saving
The TIMER _si_0e_and FLEX CLEAN _ | pads control the Continuous Bake or 12 Hour Energy Saving features. The |
oven control has a factory preset
on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.
INSTRUCTIONS | PRESS | DISPLAY |
To set the control for Continuous Bake or 12 Hour
Energy Saving features:
1. Press and hold _ | for 6 seconds or until the control beeps | _for | 6 seconds |
|
|
once. (Fig.l). "12h" or "== h" will appear in the display and the control will beep once.
2.Press _CC_leeato switch, between the 12 Hour Energy Saving and
continuous bake features. Note: "12h" (See Fig. 2) in the display indicates the control is set for 12 Hour Energy Saving
feature and % =h" (See Fig. 3) indicates the control is set for the Continuous Bake feature.
3. Press | to accept the change (See Fig. 4) display will |
Fig. 1
Fig. 2
return | to time of day) or press _ | to reject the change. |
Setting | Timer | Fig. 4 |
|
The TIMER _o_f_ pad controls the Timer feature. The Timer serves as an extra reminder in the kitchen that will beep when
the set time has run out. The Timer will not START or STOP the cooking process. The Timer feature may be used during any of the other oven control functions. Refer to "Minumum & Maximum Control Pad Settings" on page 18 for time amount settings.
INSTRUCTIONS | PRESS | DISPLAY |
To set the Timer (example for 5 minutes):
1. | Press _. |
| (See Fig. | 5). |
|
|
|
2. | Press the | number pads to set the desired | time in the display | Fig. 5 | |||
| (example | (5)). | Press | _. | The timer will begins count | ! | |
|
| ||||||
| down. (See Fig. 6). |
|
|
|
| ||
| Note: If _ |
| is not pressed | the timer will | return to the time of | Fig. 6 |
day.
3.When the set time has run out, the clock will sound with 3 long beeps every 5 seconds until d_?0e5 is pressed (See Fig. 7).
To cancel the Timer before the set time has run out:
Fig. 7
Press _5. The display will return to the time of day.
22