Setting Oven Controls
Setting Convection Convert Feature
Setting Add 1 Minute Feature
To set the Convection Convert feature
The _ | CONV CONVERT pad is used to automatically convert a standard Baking recipe for convection baking. When |
set properly, this feature is designed to display the oven set converted (reduced) temperature in the display.
Convection Convert MUST be used with a Convection Bake keypad. Cook Time or Delay Start functions may be added.
INSTRUCTIONS | PRESS | DISPLAY |
Using Convection Convert feature to adjust oven |
|
|
temperature from a Bake recipe (example below |
|
|
when setting oven for 350°F): |
|
|
1. Arrange interior oven racks and place food in oven. |
| Fig. 1 |
|
|
2.Press _, (SeeFig. 1). lf a Cook Time or a Delay Start is desired, enter the times now.
3. Press _. | "CONV BAKE" and the oven set temperature | _t _ |
Fig. 2
adjustment will appear in the display (for this example it is 325°F). A beep will sound once the adjusted oven set temperature is reached. (See Fig. 2).
Notes: When used with a Cook Time or a Delay Start setting, the Convection Convert feature will display a "CF" for check food when the bake time is 75% complete (See Fig. 3). At this time the oven control will sound 3 long beeps at regular intervals until baking has finished. When the bake time has completely finished the control will display "End" and will sound 3 long beeps every 30
seconds until the _ pad is pressed (See Fig. 4).
The oven icon will show a rotating fan within the square. This rotating fan icon indicates when the Convection Fan is operating (See Figs 2 or 3)
('_
Fig. 3
Fig. 4
Press _ to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection Convert feature with a Cook Time or a Delay Start function is 20 minutes.
®
To Set | Add 1 Minute | Feature |
|
|
| |
The @ | keypad | is used | to set additional | minutes to the Timer. Each time the @ | pad is pressed, another minute is | |
added. If the Timer | is not active and the @ | key pad is pressed, the Timer feature | will become | active and will begin | ||
counting | down from | 1 minute. When the Timer reaches the end of the set time, "End" | will display | and signal 3 long beeps | ||
at regular | intervals | until _ | is pressed again. |
|
| |
34
