Kenmore 9664, 790-.9663 manual General Care & Cleaning, Changing Oven Lights

Models: 790-.9663 9664

1 50
Download 50 pages 12.65 Kb
Page 46
Image 46
Changing Oven Lights

General Care & Cleaning

Changing Oven Lights

Care & Cleaning of Stainless Steel (some models)

Changing Oven Lights

Be sure the range is unplugged and all parts are COOL before replacing oven light. Wear a leather-faced glove for protection against possible broken glass.

The oven lights automatically turn ON when the door is opened. The oven

lights may also be manually operated by pressing the d"',0-__) pad.

The upper oven light bulbs are located at the rear of the oven cavity and both are covered with a glass shield. The glass shield must be in place whenever the oven is in use.

Replacing the upper oven interior light bulbs:

1.Turn electrical power off at the main source or unplug the range.

2.Remove upper oven interior light shield as illustrated below.

3.Replace bulb with a new T=4 type 40 Watt Halogen appliance bulb. Please note: do not allow your fingers to touch the new bulb when replacing. This will shorten the life of the new bulb. Use a paper towel to cover the new bulb when installing.

4.Replace glass shield over bulb.

5.Turn power back on again at the main source (or plug the range back in).

6.The clock will then need to be reset.

Care & Cleaning of Stainless Steel (some models)

Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the appearance of stainless parts. Refer to the Care & Cleaning Table for detailed cleaning instructions.

46

Page 46
Image 46
Kenmore 9664, 790-.9663 manual General Care & Cleaning, Changing Oven Lights, Care & Cleaning of Stainless Steel some models