Kenmore 790-.9663 Setting Oven Controls, Setting the Warm & Hold TM Feature, Instructions, Press

Models: 790-.9663 9664

1 50
Download 50 pages 12.65 Kb
Page 37
Image 37
Setting the Warm & Hold TM Feature

Setting Oven Controls

Setting the Sabbath Day Feature (cont'd)

Setting the Warm & Hold TM Feature

It is recommended that any oven temperature change with the Sabbath feature activated be followed with 2 presses of the START pad. This will insure the oven remains ON even if the attempt to set the oven temperature was lower or higher than the oven control can accept. If the oven temperature is set incorrectly, the oven temperature will default to 170°F or 550°F. Try to set the desired oven temperature again.

Should you experience a power failure or interruption, the oven will shut off. When power is returned the oven will not turn back on automatically. The oven will remember that it is set for the Sabbath and the food may be safely removed from the oven while still in the Sabbath feature, however the oven cannot be turned back on until after the Sabbath/Holidays. After

the Sabbath observance turn OFF the Sabbath feature. At the same time press and hold both the _TCi°°e_and _

pads

for at least 3 seconds. SAb will disappear from the display and the oven may be used with all normal functions. For further assistance, guidelines for proper usage, and a complete list of models with the Sabbath feature, please visit the web at

http:\\www.star-k.org.

Setting the Warm & Hold TM Feature

The _W_or_pad turns ON the Warm & Hold feature and will maintain an oven temperature of 170 ° F. The Warm & Hold

feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Warm & Hold feature will shut the oven OFF automatically. The Warm & Hold feature may be used without any other cooking operations or may be used after cooking has finished using Cook Time or Delay Start.

INSTRUCTIONS

PRESS

To set Warm & Hold:

1.Arrange interior oven racks and place baked food in oven. If the food is already in the oven go to step 2.

2. Press _w_. The Warm & Hold indicator light will flash.

Note: If no further pads are touched within 25 seconds the request to turn ON Warm &

Hold will be cleared.

3. Press _.

The Warm & Hold indicator light will glow steady indicating Warm &

Hold is ON.

V

 

4. To turn the Warm & Hold OFF at any time press G The Warm & Hold indicator

light will turn OFF. Note: The Warm & Hold feature will automatically turn OFF after 3 hours.

To set Warm & Hold to turn ON automatically:

1.Arrange interior oven racks and place food in oven. Set the oven properly for Cook Time or Delay Start.

2.Press _ww_). The Warm & Hold indicator light will flash.

v

Note: If no further pads are touched within 25 seconds the request to turn ON Warm &

Hold will be cleared.

3. Press _.

The Warm & Hold indicator light will glow steady indicating Warm &

Hold is set to turn ON automatically after Cook Time or Delay Start has finished.

4. To turn the Warm & Hold OFF at any time press 0

The Warm

& Hold indicator

light will turn OFF. Note: The Warm & Hold feature will automatically turn OFF after 3

hours.

 

 

Pressing Q at any time will stop all oven baking operations.

®

37

Page 37
Image 37
Kenmore 790-.9663, 9664 Setting Oven Controls, Setting the Warm & Hold TM Feature, Instructions, Press, To set Warm & Hold