AXIS 241QA/AXIS 241SA - Using the video server 11
5.If required, click Yes to install the AXIS Media Control (AMC). You will need administrator rights on the computer to do this.
The Live View Page
If your AXIS 241QA/AXIS 241SA has been customized to meet specific requirements, all the buttons and other items described below may not be displayed on the Live View page. Below you have an overview of all the buttons:
The Video Format
The Output buttons control an output directly from the Live View page. These buttons are configured under Setup > Live View Config > Layout.
Pulse - click this button to activate the port for a defined period of time, such as switching on a light for 20 seconds.
Active/Inactive - click these buttons to manually start and stop a connected device, such as switching a light on/off.
These buttons start/stop the Sequence Mode. This mode is created in Setup > Live View Config > Sequence mode and automatically displays the view from two or more video sources at set intervals.
From the Source list, select the desired video image(s). The list can contain internal video sources, external video sources, or the Quad Stream view. The Quad Stream option displays all four video images in one stream.
The trigger buttons trigger an event directly from the Live View page. These buttons are configured under Setup > Live View Config > Layout. Click these buttons to manually start and stop events.
Use the Snapshot button to capture a snapshot of the image currently displayed in the window.
The AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet Explorer only and displays the following buttons:
The Play/Stop buttons start and stop the media stream.