Axis Communications AXIS 241SA user manual LED indicators, Front panel Axis 241QA, Network, Status

6AXIS 241QA/AXIS 241SA - Product description

AXIS 241QA

The AXIS 241QA provides 4 BNC inputs for connecting analog video devices.

The AXIS 241QA also provides a Line/Microphone In (mono) connector for connecting an external microphone or other source, producing a line level signal. An active speaker with a built-in amplifier can be connected to Line Out (mono), to enable two-way communication. Audio communication can be bi-directional (full-duplex), push to talk (half-duplex) or in one direction only (simplex).

Front panel - AXIS 241QA

DIP switch

Line/Mic In &

Line Out

Control button Video input (x4)

LED indicators for Network, Status & Power

AXIS 241SA

The AXIS 241SA provides 1 BNC input and 1 matching loop-through output. This model can also accommodate S-Video (Y/C) by using a Y/C to BNC cable (not included).

The AXIS 241SA also provides a Line/Mic In (mono) connector for connecting an external microphone or other source producing a line level signal. An active speaker with a built-in amplifier can be connected to Line Out (mono) to enable two-way communication. Audio communication can be bi-directional (full-duplex), push to talk (half-duplex) or in one direction only (simplex).

LED indicators

After completion of the startup and self-test routines, the multi-colored LED indicators signal the following conditions:

	Unlit	No connection.
Network
	Green	Steady for connection to a 100 Mbit/s network. Flashes for network activity.
	Amber	Steady for connection to a 10 Mbit/s network. Flashes for network activity.
	Unlit	When configured for “no flash” on access.
	Green	Steady for normal operation. Can be configured to flash green at intervals
Status		whenever the unit is accessed.
	Amber	Steady during startup, reset to factory default or when restoring settings.
	Red	Slow flash for failed firmware upgrade.