16AXIS 241QA/AXIS 241SA - Video and audio streams
Other MPEG-4 clients
Although it may be possible to use other clients to view the
To access the video stream from e.g. QuickTime™ the following path can be used:
rtsp://<ip>/mpeg4/#/media.amp
This path is for all supported methods, and the client will negotiate with the AXIS 241QA/AXIS 241SA to determine exactly which transport protocol to use.
Notes: | • | <ip> = IP address. |
| • | # = video source number or the quad stream. This is set to 1 if omitted. |
Audio transmission methods
The audio stream can be accessed in the Live View page when viewing either Motion JPEG or
Using Motion JPEG
The basic transmission method of audio used in conjunction with Motion JPEG video streaming is transmission over HTTP. The video and audio streams are not synchronized when using Motion JPEG so the streams may be slightly out of sync. The latency in any stream should be low, but this will depend on the network infrastructure.
Using MPEG-4
When using
When audio is transmitted using
Note: Audio is streamed from the client to the server over HTTP when using Motion JPEG and
Accessing the audio streams
In addition to accessing audio in the Live View page using AMC, audio from the AXIS 241QA/AXIS 241SA can also be accessed in the following ways:
AXIS VAPIX API
You can read about accessing audio for the other protocols through the VAPIX® API at www.axis.com/techsup
QuickTime/Windows Media Player
It is possible to use QuickTime and Windows Media Player to listen to the audio stream using the same methods to access video streams.
Java Applet
The Java applet supports simplex audio.