12 . DRAM Controller :
1.Support 64Mb to 1Gb DDR DRAM devices.
2.Configurable 32/64 bit data bus interface.
3.Support DDR266 , DDR333 , DDR400 , JEDEC specification compliant SDRAM.
13 . Peripheral Bus Interface :
1.Support NOR/NAND flash.
2.Support CableCard host control bus.
14 . Audio :
1.Support Dolby Digital
2.
3.Dolby prologic II.
4.Main audio output : 5.1ch + 2ch ( down mix )
5.Auxiliary audio output : 2ch.
6.Pink noise and white noise generator.
7.Equalizer.
8.Bass management.
9.3D surround processing include virtual surround.
10.Audio and video lip synchronization.
11.Support reverberation.
12.SPDIF out.
13.I2S I/F.
15 . Peripherals :
1.Three UARTs with Tx and Rx FIFO , two of them have hardware flow control.
2.Two serial interfaces , one is master only the other can be set to master mode or slave mode.
3.Two PWMs.
4.IR blaster and receiver.
5.IEEE1394 link controller.
6.IDE bus : ATA/ATAPI7 UDMA mode 5 , 100MB/s.
7.
8.Memory card I/F :
9.PCMCIA/POD/CI interface
CONFIDENTIAL – DO NOT COPY | Page |
| File No. |