NOTE
If the Reallocated Sector Count or Current Pending Sector of a hard disk drive is not zero, the status of the disk will show “Warning”. This warning is only used to alert the system administrator that there are bad sectors on the disk, and they should replace those disks as soon as possible.
RAID Information
From the Storage menu, choose the RAID item and the RAID List screen appears.
This screen lists the RAID volumes currently residing on the N7700. From this screen, you can get information about the status of your RAID volumes, as well as the capacities allocated for data, USB target, and iSCSI. There is also a graph which represents how the RAID volume is currently allocated.
To configure your RAID settings, press the
RAID Config button to go to the RAID
Configuration screen.
RAID Information
Item | Description |
Select | Used to select the current RAID volume. |
Master RAID | The RAID volume currently designated as the Master RAID |
| volume. |
ID | ID of the current RAID volume. |
| NOTE: All RAID IDs must be unique. |
RAID Level | Shows the current RAID configuration. |
Status | Indicates status of the RAID. Can read either Healthy, |
| Degraded, or Damaged. |
Disks Used | Hard disks used to form the current RAID volume. |
Total Capacity | Total capacity of the current RAID. |
Data Capacity | Indicates the used capacity and total capacity used by user |
| data. |
USB Capacity | Indicates the capacity allocated to USB target mode. |
iSCSI Capacity | Indicates the capacity allocated to iSCSI. |
RAID Config | Press this to configure RAID volumes. |
Space Allocation | Press this to adjust the space allocated for data, USB target |
| mode, and iSCSI. |
RAID Configuration
On the RAID List screen, press the RAID Config button to go to the RAID Configuration screen. In addition to RAID disk information and status, this screen lets you make RAID configuration settings.
For more information on RAID, see Appendix
C: RAID Basics.
29