iSCSI CRC/Checksum
To enable this option, the initiator can connect with “Data digest” and “Header digest” enabled.
Network Management
Use the Network menu to make network configuration settings as well as service support settings.
WAN Configuration
From the Network menu, choose WAN, and the WAN Configuration screen appears. This screen displays the network parameters of the WAN connection. You may change any of these items and press Apply to confirm your settings. See a description of each item in the following table:
WAN Configuration
Item | Description |
Host name | Host name that identifies the N7700 on the network. |
Domain name | Specifies the domain name of the N7700. |
MAC Address | MAC address of the network interface. |
Jumbo Frame Support | Enable or disable Jumbo Frame Support of the WAN interface on |
| your N7700. |
DHCP | Enable or disable the N7700 from obtaining in IP address via |
| DHCP server. If you require a static IP, disable this feature and |
| input your network configuration. |
IP | IP address of the WAN interface. |
Netmask | Network mask, which is generally: 255.255.255.0 |
Gateway | Default Gateway IP address. |
DNS Server | Domain Name Service (DNS) server IP address. |
IP Sharing Mode | When enabled, PCs connected to the LAN port will be able to |
| access the WAN. Default is Enabled. |
| 45 |