2 | Safety |
|
|
2-1 Work Rules
The installation, operation, and maintenance of this equipment must be conducted in accordance with all appli- cable work and safety codes for the installation location. This may include, but is not limited to OSHA, NEC, CSA, SPI, and any other local, national, and international regulations.
;Read and follow these operating instructions when installing, operating, and maintaining this equipment. If the instructions become damaged or unreadable, additional copies are available from Sterling.
;Only qualified personnel familiar with this equipment should work with this system.
;Work only with approved tools and devices.
;Disconnect and lock out power while working on this equipment.
2-2 Tools and Equipment Needed
These tools and equipment are necessary for installation:
;
;
Hand tools.
Wire, conduit, and fittings for wiring runs.
;Anchor bolts with nuts and washers or red
2-3 Safety Considerations
The terms NOTICE, CAUTION, WARNING, and DANGER have specific meanings in this manual.
NOTICE is used to indicate a statement of company policy directly or indirectly related to the safety of personnel or protection of property.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Page 11 of 38