Sterling 1-Pump 5-Station Controller service manual Model # Serial #

Page 2

Write down your unit serial number(s)

Model #

Serial #

here for future reference

________________

________________

 

________________

________________

 

________________

________________

 

________________

________________

Performance figures stated in this manual are based on a standard atmosphere of 59°F

(15°C) at 29.92” Hg (1,014 millibars) at sea level, using 60 Hz power. Altitude is an important consideration when specifying vacuum conveying components. Sterling can advise you on proper selection and sizing of systems for your operating environment.

Sterling is committed to a continuing program of product improvement. Specifications, appearance, and dimensions described in this manual are subject to change without notice.

 

© Copyright Sterling 2003

All rights reserved.

Effective 11/7/2003

Part No. A0

Bulletin No. SM2-615

Page ii of 38

Image 2
Contents SSC1-5Q Model # Serial # Parts and Service Department Table of Contents Configurable Settings Charts and Figures Safety Considerations Sterling SSC1-5Q Conveying Systems Pump 5-Station Controller Necessary Documents General InformationEquipment Function System CapabilitiesSSC1-5Q 5-Station Controller Equipment CycleModels Covered by this Manual SSC1-5Q Controller Work Rules SafetySafety Considerations Tools and Equipment NeededReporting a Safety Defect General ResponsibilityMaintenance Responsibility Operator ResponsibilityFail Safe Operation Safety DevicesSafety Circuit Standards Safety Device Lock-Outs Page Event of Shipping Damages Shipping InformationUnpacking and Inspection Parcel Post ShipmentIf the Shipment is Not Correct United Parcel Service ShipmentIf the Shipment is Not Complete ReturnsMaking SSC1-5Q Control Panel Power Drop Wiring Connections InstallationInstalling the SCC1-5Q Control Panel Connecting the Control Panel to Vacuum ReceiversConnecting the Control Panel to the Pump Package Special Timed ConveySetting Up the System Using the ControllerSetup Basic Menus and Setup of ControllerSetting Pump Parameters Setting Blowback ParametersChanging Parameters Starting the SystemHigh vaccum alarm will sound in Short Tones Long Tones6Configurable Settings Options for Station SetupOptions for Pump Setup Idle7Maintenance Troubleshooting General TroubleshootingPump Alarms AlarmsStation Alarms 230/1/60 Operation Remote Audible/visual alarmOptions CE Package for 220/1/50 OperationSpare Parts List Recommended Spare Parts ListTechnical Assistance Contact Information for Technical AssistanceCredit Returns Warranty ReturnsReturned Material Policy Warranty Controller Identification Serial Number Tag Safety Tag InformationController Safety Tags Appendix Page Service Department