DVD Menu Options
English
versa. Choose zero (0) to balance the contrast.
Tint
Increase the value to darken the picture or vice versa. Choose zero (0) for average setting.
Color
Increase the value to enhance the colour in your picture or vice versa. Choose zero (0) to balance the colour.
EPress / to adjust the setting that best suits your personal preference.
FRepeat steps D~ E to adjust your picture preference.
GPress / to select ＇Close＇ and press OK to confirm.
Using the Audio setup menu
Night Mode
This mode optimizes playback of sound at low volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level.
AIn ＇ Audio＇, press / to select { Night Mode }, then press .
{On }
Select this to set low volume output. This feature is only available for movie discs with Dolby Digital
mode.
{Off }
Turns off night mode feature. Select this to enjoy the surround sound with its full dynamic range.
BUse / to select a setting and press OK to confirm.
APress SETUP on the remote control. The system setup menu appears.
Language | Digital Output | : All |
| Night Mode | : Off |
Video | Down Sampling | : On |
| 3D Effects | : Off |
Audio |
|
|
Rating
Misc
BPress / to select { Audio }, then press .
CPress / to select an item, then press to access.
Example: { Night Mode }
The options for the selected item appears.
If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.
DUse / to select a setting and press OK to confirm.
Example: { On }
The setting is selected and setup is completed.
ETo exit, press SETUP.
Digital Output
Select this if you connect to a multichannel decoder/ receiver.
AIn 'Audio', press / to select { Digital Output }, then press .
{ All }
Select this if the connected device has a
{PCM }
Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital signal to PCM (Pulse Code Modulation).
{Off }
To deactivate the digital audio output. For example, if you use the AUDIO OUT jacks to connect to a TV or stereo system.
BUse / to select a setting and press OK to confirm.
Tip:
Helpful hint: Press to go back to previous menu item. Press SETUP to exit the menu item.
Down Sampling
You can enable and disable the digital signal for better sound output quality.
AIn ＇Audio＇, press / to select { Down
Sampling }, then press .
{Off }
If your amplifier / decoder is compatible with 96 KHz PCM, select “ Off “ . Sound is sampled at 96 KHz.
{On }
If your amplifier / decoder is not compatible with 96 KHz PCM, select “ On “ . Sound recorded at 96 KHz is down sampled to 48 KHz.
BUse / to select a setting and press OK to confirm.
Tip:
- When playing back disc with copyright protection, the sound will be down sampled to 48 KHz even when you select Down Sampling off.
3D Effects
To obtain expansive virtual surround sound effects from two speakers, set 3D Effects to on. This enhancement sounds only output from the Analogue AUDIO OUT (L / R) jacks of the DVD player.
AIn 'Audio', press / to select { 3D Effects }, then press .You can set to { Off } or { On }.
BUse / to select a setting and press OK to confirm.
Tip:
- Only effective in playback of a DVD Video disc with Dolby Digital 5.1 bitstream.
Using the Rating setup menu
APress SETUP on the remote control. The system setup menu appears.
Language | Parental control | : 8.Aduit |
Set Password
Video
Audio
Rating
Misc
BPress / to select {Rating }, then press .
19