Toshiba SD-690KR manual Connections, Using Component Video JacksY, PB, PR, Using a RF modulator

Connections

TV, use the audio cables(white/red)to connect

Connecting to televisionAUDIO OUT(L/R)jacks of the DVD player to corresponding AUDIO IN jacks on the TV(cable supplied).

IMPORTANT!

–You only need to make one video connection from the following options, depending on the capabilities of your television.

–Connect the DVD player directly to the television.

Using SCART socket

Using Component Video Jacks(Y, PB, PR)

English

MAINS

AUse the scart cable to connect the DVD SCART OUT to the corresponding scart input socket on the TV

(cable not supplied).

If your DVD player will not be connected to a Stereo System or AV Receiver to hear better sound, scart is enough for both audio and video connections.

Using Composite Video Jack(CVBS)

MAINS

IMPORTANT!

-The progressive scan video quality is only possible when using Y, PB, PR and a progressive scan TV is required.

AUse the component video cables (green/blue/red) to connect the DVD player' s Y, PB, PR jacks to the corresponding Component video input jacks (or labelled as Y, Pb, Pr) on the TV (cable not supplied).

BUse the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD player to the corresponding AUDIO IN jacks on the TV(cable not supplied).

CProceed to page 11 for detailed Progressive Scan set up.

Using a RF modulator

A Use the composite video cable (yellow) to connect

the DVD player' s VIDEO(CVBS) jack to the video	MAINS
input jack(or labelled as A/V in, Video In or
Composite) on the TV(cable supplied).
To hear the sound of this DVD player through your

Helpful hint: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.