Toshiba 26HF66 appendix Image tilt correction, Adding channels to the TV’s memory

Image tilt correction

When you install or change the direction of the TV, the picture may become tilted (caused by the Earth’s magnetism). If this happens, use the image tilt correction feature to obtain the best possible picture.

To adjust the image tilt:
1.	Press MENU, then press			or
	until the SETUP menu appears.				S E T U P
2.	Press ▲ or ▼ to highlight IMAGE				IMAGE TILT	0
	TILT.				SIGNAL METER
3.	Press	or	to adjust the picture
	tilt (from –10 to 10).				:SELECT	:ADJUST

Adding channels to the TV’s memory

When you press CHANNEL ▲/▼ on the TV or CH M/? on the remote control, your TV will stop only on the channels you have programmed into the TV’s channel memory. Follow the steps below to program channels into the channel memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase channels manually.

To add channels automatically:
1.	Press MENU, then press or to
	display the SETUP menu.
2.	Press ▲ or ▼ until the TV/CABLE	SETUP
		LANGUAGE		ENGLISH
	selection is highlighted.
		CLOCK SET
3.	Press or to highlight either TV or	TV / CABLE		TV /	CABLE
		CH PROGRAM
		ADD / ERASE
	CABLE, depending on which you		:SELECT	:ADJUST
	use. If you use an antenna, choose
	TV. If you use cable, choose CABLE.

4.Press ▼ until the CH PROGRAM selection is highlighted.

5.Press or to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message “PROGRAMMING NOW–PLEASE WAIT” appears.

6.When channel programming is complete, the message “COMPLETED” appears.

7.Press CH M or ? to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.	Press MENU, then press or to dis-
	play the SETUP menu.
2.	Press ▲ or ▼ until the ADD/ERASE			SETUP
				LANGUAGE		ENGLISH
	selection is highlighted.
				CLOCK SET		CABLE
3.	Press	or	to display the ADD/	TV / CABLE
				CH PROGRAM
				ADD / ERASE
	ERASE menu.				:SELECT		:ADJUST
4.	Press ▲ or ▼ to select ADD/ERASE,
	then press .
5.	Press ▲ or ▼ to select the desired channel to be added or erased.
	Press	or	to select ADD or ERASE, whichever function you want
	to perform.
6.	Repeat step 5 for other channels you want to add or delete, then
	press ENTER.
7.	Press EXIT to return to the normal screen.

To add a digital channel you are watching:

Select a channel you want to add. Press ▲ or ▼ to select ADDING CHANNEL in step 4 above, then press .

To erase all channels from the channel memory:

Press ▲ or ▼ to select CLEAR ALL in step 4 above, then press .

All channels are erased from the channel memory. (You can still use the Channel Numbers on the remote control to tune a channel.)

21

Channel

Numbers

Channel M/?

Menu/Enter

Exit

Note:

You can add the channel manually (see “Adding and erasing channels manually,” below).

Safeguards Important

TWelcome oshiba to

yourConnecting TV

Remote ControlUsing the

your TVSetting up

FeaturesUsing the TV’s

Appendix

J3W60321A_En_p15-22 21 27/2/06, 9:54 AM