Toshiba 37RV530U, 32RV530U, 52RV530U, 46RV530U Connecting an Hdmi or DVI device to the Hdmi input

Page 16

Chapter 2: Connecting your TV

Connecting an HDMI™ or DVI device to the HDMI input

The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D–compliant[1]consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).

The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 63.

Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48 kHz

Note: To connect a PC to the HDMI input, see page 19.

To connect an HDMI device, you will need:

•one HDMI cable (type A connector) per HDMI device

–For proper operation, it is recommended that you use an

HDMI cable with the HDMI Logo ( ).

–To display an 1080p/60Hz signal format, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly.

–HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration).

–See “Setting the HDMI™ audio mode” (- page 32).

TV upper back panel

 

 

 

TV right side panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI device

VIDEO

AUDIO

HDMI OUT

L

R

 

IN IN

OUT

LR

To view the HDMI device video:

Select the HDMI 1, HDMI 2, HDMI 3, or HDMI 4 video input source on the TV.*

*To select the video input source, press INPUT on the remote control (- page 21). To program the TV remote control to operate other devices, see Chapter 3.

To connect a DVI device, you will need:

•one HDMI-to-DVI adapter cable (HDMI type A connector) per DVI device

–For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

•one pair of standard analog audio cables per DVI device

–An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration).

–See “Setting the HDMI™ audio mode” (- page 32).

TV upper back panel

DVI device

VIDEO

AUDIO

DVI/HDCP

L

R

OUT

 

IN IN

 

 

OUT

L

R

Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

•When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device.

•When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV.

[1]EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high- definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents 32RV530U 37RV530U 42RV530U 46RV530U 52RV530U Safety Precautions IssueTune Into Safety Dear CustomerImportant Safety Instructions Installation, Care, and ServiceAdditional Safety Precautions InstallationService CareTo Display your LCD TV using a Wall Bracket Choosing a location for your LCD TVTo Display your LCD TV on the included Pedestal Stand Removing the Pedestal StandImportant notes about your LCD TV PartTrademark Information Contents Troubleshooting Features of your new TV IntroductionEffective range TV front and side panel controls and connectionsGreen and Yellow LEDs TV back panel connections Overview of cable types Connecting your TVAbout the connection illustrations To view the antenna or Cable signal You will need To view basic and premium Cable channels To view the VCRTo view antenna or Cable channels To view the DVD playerTo view the VCR or view and record antenna channels To record a TV program while watching a DVDTo control the devices To connect the IR blaster cableIf you cannot locate the device’s infrared sensor Connecting an Hdmi or DVI device to the Hdmi input To connect an Hdmi device, you will needTo view the Hdmi device video To connect a DVI device, you will needREGZA-LINK connection Before controlling the devicesConnecting an audio system To control the audioConnecting a personal computer PC SignalTo connect a PC to the PC in terminal on the TV To connect a PC to the Hdmi terminal on the TVUsing the remote control Preparing the remote control for useInstalling the remote control batteries If you have a Toshiba deviceLearning about the remote control Using the remote control to control your other devices To use your TV remote control to operate aVCR, set the Mode Select switch to AUX AUXRemote Control functional key chart AUX 1 VCRProgramming the remote control to control your other devices Cable converter box Satellite receiverTV/VCR Combo DVD/VCR ComboHtib Setup/Installation menu layout Menu layout and navigationMain menu layout IconNavigating the menu system ApplicationsSetting up your TV To configure the ANT/CABLE input sourceInput Configuration, and press T Selecting the menu languageProgramming channels automatically Manually adding and deleting channels in the channel memoryLabeling channels Setting the Hdmi audio mode To set the Hdmi audio modeTo create and assign a custom label To delete the custom labelViewing the digital signal meter Setting the time zoneReset Factory Defaults Selecting the Power-On ModeViewing the system status Using the TV’s features Selecting the video input source to viewLabeling the video input sources To select the video input source to viewTuning channels using Channel Browser Tuning channelsFavorites Browser Elements of the Channel Browser Setting the Channel Tuning Mode Tuning to the next programmed channelTuning to a specific channel programmed or unprogrammed Adding and clearing channels and inputs in the History ListSwitching between two channels using Channel Return Switching between two channels using SurfLockTo select the picture size using the remote control To select the picture size using the menusPicture Size Natural TheaterWide For 43 format programsTheaterWide For letter box programs TheaterWide For letter box programs with subtitlesUsing the auto aspect ratio feature To set the scroll settingsTo turn on the auto aspect ratio feature To turn off the auto aspect ratio featureUsing the Freeze feature Adjusting the pictureSelecting the picture mode Adjusting the picture qualityUsing the TheaterLock feature Using the closed caption modeDigital CC Settings Base closed captionsAdjusting the audio Using the digital audio selectorCC Selector Muting the soundAdjusting the audio quality To adjust the audio qualityTo turn off the StableSound feature Selecting stereo/SAP broadcastsUsing the Locks menu Control featureEntering the PIN code If you cannot remember your PIN codePress b to highlight Enable Rating Blocking Changing your PIN codeBlocking TV programs and movies by rating V-Chip To block and unblock TV programs and moviesBlocking channels Unlocking programs temporarilyUsing the GameTimer Using the input lock featureUsing the control panel lock feature Using the PC settings feature Setting the PC AudioTo adjust the PC settings To set the PC AudioUsing REGZA-LINK Setting the sleep timerREGZA-LINK playback device HD DVD player, etc. control Volume and Mute controls of Audio Receiver REGZA-LINK input source selectionOther REGZA-LINK functions REGZA-LINK Player Control menu functionsTo set the REGZA-LINK Setup Using the Hdmi settings featureTo set the Hdmi Settings Understanding the auto power off feature Understanding the last mode memory featureTo display TV status information using Recall To display TV status information using InfoUsing the TV’s advanced features Using the advanced picture settings featuresUsing dynamic contrast Using the static gamma featureUsing CableClear digital noise reduction Selecting the color temperatureUsing Mpeg noise reduction Using the Game Mode feature Using the ColorMaster featureUsing Color Palette Adjustment Using the advanced audio settings features Using the surround sound featuresTo adjust the settings OffTroubleshooting General troubleshootingRemote control problems Channel tuning problemsClosed caption problems Rating blocking V-Chip problemsLED indications Specifications AppendixAcceptable signal formats for PC in and Hdmi terminals Format Resolution Frequency Pixel Clock FrequencyLimited United States Warranty For LCD Televisions 26 and LargerLimited Canadian Warranty For Toshiba Brand Flat Panel TelevisionsDisclaimer and Limitation of Remedy Appendix Index FreezePage Page Page Page Page 08-01
Top Page Image Contents